Low Viscosity Liquid Epoxy Adhesive Mortar
Close
EPOFIX 712 LV
A low viscosity epoxy adhesive / mortar which is specially formulated as structural adhesive for bonding plastics, brick, timber, ceramic, metals, particle board and concrete.
- Formulated to patch, fill and seals void/cracks of all concrete, timber, ceramic, metal or plastic surface.
- Areas such as basement, RC gutter, toilet/bathroom, kitchen, planter box, water tank/reservoirs, fountains and roof.
- Excellent Bonding Strength
- Easy to use
- High adhesion to concrete, timber, ceramic, metal or even plastic.
- Good mechanical strength
- Good weatherability
- Good resistance against oil, solvent and other chemicals
Color
In Amber or Grayish-Transparent.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOFIX 712 GP
General Purpose Epoxy Adhesive
A 100% Solids, two part resin general purpose epoxy mortar system for general repair work.
- Specially formulated as a structural adhesive for bonding plastics, bricks, timber, ceramic, metals, particle board and concrete.
- Used to patch, fill and seals voids/cracks of all concrete, timber, ceramic, metal or plastic surface,
- e.g. – Patching spelled or honeycombs, protecting exposed reinforcement, reinstating damagedarises and repairing damaged precast concrete building units.
- Excellent Bonding Strength
- Easy to use
- Perfect adhesion to concrete, timber, ceramic,metal or even plastic.
- Good mechanical strength
Color
In Amber or Grayish-Transparent.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURAGARD 104
A High Solid Surface Tolerant Epoxy Coating
A high surface tolerant epoxy enveloping coating. Formulated with exceptional penetrating power that will adhere on surfaces where extensive preparation is not feasible.
- Resistant to splash, spillage and fumes of acid, alkali, solvent and salt water when top coated with polyurethane coating.
- Also suitable for food, pharmaceutical, electronics, glove factory and other light industrial plants.
- Proven material for structural steel, bridges, tank exteriors, piping, roofs, off-shore and other substrate subject to high humidity and moisture.
- Self priming and surface tolerant
- Excellent adhesion on most surfaces
- Versatile, easy to apply and low maintenance
- Can be further top coated with compatible coatings
- Resistant to abrasion, chemical and corrosion
Color
LIGHT GREY
OFF WHITE
Finish
Semi Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
AQUAREX EPH
A water dispersed, hybrid epoxy coating formulated using the latest hybrid technology to deliver superior adhesion, abrasion and water tolerant properties.
- Formulated for use on walls and floors of hangars, warehouses, garages, manufacturing facilities, clean rooms, car parks, walkway and other light to medium traffic areas.
- Economical
- Hygienic – easy to clean and maintain
- Durable – excellent abrasion resistance
- Attractive
- Odorless
- Environmental Friendly
Color
Available in pigmented and clear for glazing.
LIGHT GREY
DARK GREY
GREEN
BROWN BEIGE
CREAM
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURAGARD VE 98
Modified High Build Epoxy Vinyl Ester Resin For High
Temperature, Solvent And Chemical Resistance Coating Or FRP Lining System
A high build epoxy vinyl ester resins formulated with specially selected curing agents to withstand high temperature exposure, solvent and chemical attacks. A slip resistant texture can also be formulated if desired.
- Ideally suited for use in tank coating or lining where a high degree of resistance to chemicals, oils and grease is required such as waste water treatment tank lining, chemical manufacturing plants area, chemical drainage gutter or pipe and transportation tank lining.
- Durable and low maintenance costs
- High chemical temperature resistance
- Excellent chemical resistant against a wide range of industrial chemicals
- Liquid applied
- Specially formulated for use in hot climate area
Color
Available in White and Coral Brown. Other colors can be matched upon request.
CORAL BROWN
WHITE
Finish
Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DERMASTIC 900
Liquid Waterproofing Membrane
A flexible liquid waterproofing and sealing membrane, based on modified acrylic polymers. Its latex properties completely resists ozonolysis and other oxidative degradation.
- Ideal for waterproofing surfaces at non-trafficable areas.
- Can be used to refurbish and protect asbestos-cement roof sheets from atmospheric corrosion due to weathering and/ or pollution.
- Economical
- One component material & no mixing required
- Economical
- Ability to resist ozonolysis & other oxidative degradation
- Full resistant to ultra violet light
- Outstanding elasticity
Color
Other colors can be matched upon on request.
TELE GREY
GREY WHITE
PASSION GREEN
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURAPOL 500
A Pigmented Polyester Urethane Coating
A high performance, pigmented polyester urethane coating with anti slip properties capable to resist chemicals, ultra violet and abrasion.
- Designed to be used as a protective and decorative finishing top coat to resist against chemical, ultra violet and abrasion.
- Recommended area of applications include on concrete walls, fascias, doors, timber panels, floors and even aircraft bodies.
- Also suitable for exterior of tanks, piping, structural steel and concrete surfaces where chemical resistance and weather capability are required.
- Attractive and versatile; ultimate form of protection and decoration
- Compliance – BS 476 Part 5, 6 & 7 for Class ‘2’ fire rating
- Hard wearing – Recommended for use in vandal / graffiti prone areas
Color
Available in wide range of colors upon request.
BUTTER CREAM
WINDOW GREY
BRIGHT GREEN
SIGNAL BLUE
MISTY GREY
Finish
Gloss, Satin, Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
RUSTGARD 107
An Inhibitive Epoxy Primer
A premium grade, rust inhibitive epoxy primer for steel surfaces.
- Specially formulated for use as a primer and to be further top coated with other compatible epoxy coatings.
- Proven material for the protection of steel, tank exteriors, bridges, conveyors, offshore platforms, marine structures and any aggressive industrial and marine environments.
- Economical
- Provides a long term corrosion protection to steel substrates
- Quick drying & can be top coated after 3 hours of curing at 30ºC
- Compatible with most epoxy and polyurethane coatings
Color
Red Oxide
White
Finish
Flat
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOFIX 713 EPIS (UW)
Underwater Epoxy Resin Injection
An underwater grade, low viscosity epoxy adhesive formulated to seal and repair fine cracks in concrete as to restore the concrete’s structural strength.
- Specially formulated for underwater or marine structure applications.
- The cured adhesive will seal the cracks entirely and completely restores the concrete to its original monolithic condition.
- Also suitable to be used as a repairing material for rebounding of delamination in concrete toppings, grouting of bolts, anchor bars etc and consolidation of friable rocks and stones.
- Fast cure
- High strength
- Low viscosity, ready to flow
- Excellent adhesion even on damp surfaces
- Low reactivity thus reduces exothermic heat generation
Color
Amber Brownish
Finish
Flat
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURAFLOR SL (HC) 2K
A Self-Smoothening Epoxy Topping 1-2mm Thickness
A seamless, self-smoothening epoxy topping meant for 1 – 2 mm in a single application.
- For use on areas like food processing, clean rooms, laboratories, hospital, light duty manufacturing areas and as a topping for DURAFLOR EM Mortar System.
- Food grade – non solvent and taint free formulation
- Hard wearing – good abrasion resistance with stand foot light vehicular traffic
- Range of colors – enhances working environment
- Hygienic – provides easy to clean dust free surface
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
CREAM
BUTTER CREAM
STONE GREY
DEEP GREY
PASSION GREEN
Finish
Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURAFLOR SL COLORQUARTZ
Decorative Self-Smoothening Epoxy Topping
A seamless, decorative self-smoothening epoxy topping meant for 1mm in a single application.
- To provide an easy to clean, decorative and durable floor with outstanding wear and chemical resistance.
- For use on areas like food processing, clean rooms, laboratories, hospital, light duty manufacturing areas and as a topping for DURAFLOR EM Mortar System.
- Food grade – non solvent and taint free formulation
- Hard wearing – good abrasion resistance with stands foot and light vehicular traffic
- Hygienic – Provides easy to clean, dust free surface
- Range of colors – enhances working environment
Color
Available in a range of standard color combinations. Other colors can be matched upon request.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
CEMGUARD HB 500 AS
A Conductive Reactive Nano Silicate Hybrid Coating
A hybrid coating which is synthesized of inorganic component as a main component along with a conductive undercoat to prevent electrostatic build-up in sensitive areas.
- Provides exceptional adhesion to a variety of substrate including prepared old/new concrete floors which are free from oil, stains and other contaminants.
- Area of application includes car parking lot, aircraft hangars, machinery room, utility room, maintenance room, factory, warehouse, chemical lab, general office and food processing plant.
- Water tolerant – product is not sensitive to ground moisture
- Product is not sensitive to high humidity and low temperature during application
- Provides protection against both chemical and mechanical attack
- VOC compliance
- Chemical/oil resistant
- Anti-Stain, Anti-Graffiti
- Fire resistant – cured coating is non-flammable (>500 °C)
- Extremely hard wearing, behave like glass when fully cured
Color
Available in Standard Flooring colors.
DARK GREY
CREAM
BROWN BEIGE
RED
GREEN
Finish
Semi Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.