A Water-Based Court System
Close
TC COAT
A single component water-based system specially formulated to be used for tennis courts/ badminton courts
- Consists of a high performance primer, binder and finishing coat
- For interior and exterior uses which when combined with selected aggregates to form a hard but shock absorbing, abrasive resistant surface specially for court construction.
- High abrasion resistance
- Excellent weatherability
- Excellent adhesion to base surface
- Good alkaline and mild chemical resistance
- Excellent workability
Color
Available in Standard Courts Colors. Other colors can be matched upon request.
OXIDE RED
CAPRI BLUE
RESELLA GREEN
Finish
Semi Gloss to Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
HYDRAFOAM PU
A Polyurethane Foam Injection
A hydrophobic polyurethane grout designed to stop water leakages.
- Typically injected into cracks in concretes, honeycombed concretes, soils, pipes, pipe intrusions and other voids by use of a high pressure pump.
- Stop water leaks coming through cracked or honey-combed concrete voids between wall floor, wall and ceiling, expansion joints, cold joints and pipe intrusions.
- It is used to repair concrete walls, ceilings and floors that are leaking; in tunnels, including limestone, manholes, sewer lines and in concrete dams.
- Seals water carrying cracks
- It can be applied using suitable high or low pressure injection packers.
- Low viscosity
- The expansion rate of the material is 20 times of its own volume.
Color
Dark Amber
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOFIX 713 EPIS
Injection Grade Epoxy Resin
A low viscosity epoxy adhesive formulated to seal and repair fine cracks in concrete as to restore the concrete’s structural strength.
- Designed to be used as a repairing material for cracked concrete.
- The cured adhesive will seal the cracks entirely and completely restores the concrete to its original monolithic condition.
- Rebounding of delamination in concrete thus avoiding costly replacements
- Consolidation of friable rocks and stones
Color
Brownish-Amber.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOFIX 712 LW
Low Weight Structural Epoxy Adhesive
A thixotropic 100% solid two component, high modulus, high strength adhesive for structural jointing and strengthening.
- Ideally used as adhesive for structural bonding, jointing of pre-cast segmented bridge units, adhesive for external steel plate bonding and adhesive for composite strengthening.
- It also recommended using on vertical surfaces.
- 100% Solid, odorless
- Excellent cohesive bond
- Can be applied on vertical and horizontal surfaces
- Good adhesion to concrete, steel, timber, glass, rubber and carbon fiber
- High mechanical strength
Color
Grey.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
SD FORMULA
A Concrete Sealer, Densifier, Dustproofer & Chemical Hardener
An environmental friendly, reactive concrete sealer designed to react strongly with free lime particles in concrete substrates before solidifying into a hardened, homogeneous concrete mass.
- Hardened concrete improves resistance to abrasion, thus making it dust-proof and reduces water/oil penetration.
- Increases the lifetime while reducing the maintenance of concrete floors.
- Recommended for high traffic areas such as warehouses, distribution centers, manufacturing plants, textile mills, food processing plants, aircraft hangars, carparks or service garages, etc.
- Forms a permanent, insoluble bond within the capillaries
- Produces a hardened surface layer that is breathable, dense and abrasion resistant
- Hardened surface is dust-proof as well as stain resistant
- Non-yellowing, non-discoloring product and can resists tire marks
- Mirror like finish when polished
Color
Clear
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOCOTE 106 HB DUAL TONE
A Special Designer Effect Epoxy Coating
A durable, easy to apply, high build cured epoxy resin coating. Formulated to be applied with a designer special effect. When cured, forms a semi-gloss, impervious finish which is easily cleaned and maintained.
- Formulated for floors and walls where high level of aesthetic value and chemical resistance are required.
- Can be applied on concrete, masonry, timber, etc.
- Hygienic – provides easy to clean dust free surface
- Hardwearing – good abrasion resistance for foot and light vehicular traffic
- Excellent Adhesion
Color
Available in Standard Flooring Colors.
IVORY
BUTTER CREAM
BRICK RED
TELE GREY
MID BLUE
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOFIX 712 LV
Low Viscosity Liquid Epoxy Adhesive Mortar
A low viscosity epoxy adhesive / mortar which is specially formulated as structural adhesive for bonding plastics, brick, timber, ceramic, metals, particle board and concrete.
- Formulated to patch, fill and seals void/cracks of all concrete, timber, ceramic, metal or plastic surface.
- Areas such as basement, RC gutter, toilet/bathroom, kitchen, planter box, water tank/reservoirs, fountains and roof.
- Excellent Bonding Strength
- Easy to use
- High adhesion to concrete, timber, ceramic, metal or even plastic.
- Good mechanical strength
- Good weatherability
- Good resistance against oil, solvent and other chemicals
Color
In Amber or Grayish-Transparent.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOFIX 712 GP
General Purpose Epoxy Adhesive
A 100% Solids, two part resin general purpose epoxy mortar system for general repair work.
- Specially formulated as a structural adhesive for bonding plastics, bricks, timber, ceramic, metals, particle board and concrete.
- Used to patch, fill and seals voids/cracks of all concrete, timber, ceramic, metal or plastic surface,
- e.g. – Patching spelled or honeycombs, protecting exposed reinforcement, reinstating damagedarises and repairing damaged precast concrete building units.
- Excellent Bonding Strength
- Easy to use
- Perfect adhesion to concrete, timber, ceramic,metal or even plastic.
- Good mechanical strength
Color
In Amber or Grayish-Transparent.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
PVC COAT 400 WB
An Environmental Friendly, Heavy Duty Rust Inhibitive Pigmented Hybrid Coating
An environment friendly, heavy duty, rust inhibitive pigmented hybrid coating designed to be directly applied onto hot dip galvanized steel surface.
- Specially formulated as a high perfomance protective topcoat for galvanized steel works.
- Approved by the Department of Civil Aviation, Malaysia for on site application to galvanized steel transmission and communication towers for its visibility and safety.(Ref.: DCA/P/4/1.27)
- Easy application
- Anti corrosion
- Excellent chemical resistance
- Excellent adhesion
- No fire hazard during storage and application
- Environmental friendly
- Excellent film build up & durability
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
ZINC GREY
ORANGE
WHITE
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
S-CRETE HF
A trowel applied, polyurethane topping with an end finishing thickness of 6-9 mm screed. Functionally formulated to withstand severe chemical, mechanical, and thermal damages in industrial applications and repairing systems with a Matt and anti-skid finish.
- Mechanically durable to be used on flooring for loading docks and warehouses. Its anti-skid finish makes it ideal to be used in oily/ slippery service condition where the factor of safety is concerned.
- Area of application includes kitchen, beverage processing and packaging plants. It is also suitable for areas where chemical resistance is required, such as in chemical processing plant, containment area and wash down rooms.
- Alternatively, it is also suitable for areas where thermal shock resistance is required, such as with flooring for freezers, refrigerators, and oven installed spaces.
- Anti-skid surface for improved safety factor
- Anti microbial
- Excellent chemical resistance
- Maximum wear, abrasion and impact resistance
- Fastest “turnaround time” product
- User-friendly, no solvent odor during installation
- Optimum sanitation and hygienic finish.
- Easily cleaned and maintained
- Meets Japanese Standard JISZ 2801:2000, 5.2
Color
Standard S-CRETE colors.
BROWN BEIGE
RED
DARK GREY
GREEN
CREAM
Finish
Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
CEMGUARD HB 500 R
A Chemical Resistant Reactive Nano Silicate Hybrid Coating
A chemical resistant nano silicate hybrid coating which has excellent acid and alkaline resistance. The cured coating is tough and thermal shock resistant. It is an eco-friendly product as it contains very little hazardous organic solvent.
- Exceptional adhesion to a variety of substrate including prepared old/new concrete floor/wall which is free from oil, stains and other contaminants.
- Areas of application includes chemical lab, battery room, acid/alkaline tank, tank farm lining, sewerage tanks, galvanizing plant and other chemical prone areas.
- VOC compliance
- High chemical resistant
- Fire resistant; cured coating is nonflammable (>500 °C)
- Extremely hard wearing, behaves like glass when fully cured
- Water tolerant; product is not sensitive to ground moisture
Color
CLEAR
Finish
Semi-Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
D’LINE 302
A Pigmented Acrylic Road Marking
A silicone, acrylic-based road marking filled with ceramic powder for extra wear resistance performance.
- Formulated especially for road markings or car parks demarcation, road dividers and other safety warning purposes.
- Excellent adhesion
- Fast dry; shorter traffic opening time
- Excellent wear resistance
- Enhanced light retroflectibility
- Good flexibility
Color
Standard D’LINE colors. Special colors can be matched upon request.
MID BLUE
BRIGHT GREEN
BUTTER CREAM
STONE GREY
DEEP GREY
Finish
Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.