Showing 1–12 of 23 results

Show sidebar

AQUAREX SNG

A Non-Gassing Rust Inhibitive Water-Dispersed Epoxy

A high performance, non-gassing, rust inhibitive water dispersed epoxy designed to be used as a primer or top coat on steel substrates.

  • Specially formulated as a high performance protective and decorative coating.
  • Ideal to be used at site where solvent-based material is not desirable.
  • Ideal for use as anti-corrosion for steel pipes, steel tanks and other facilities subjected to corrosion in a clean room environment.
  • A rust inhibitor
  • Compatible with a wide range of top coats
  • Does not leach toxic ingredients after cured and does not contain any amine, ammonia or solvent
  • Meets BS 6920-1988 (Part 1) requirement
  • Non-gassing
  • Resistant to a wide range of chemicals
  • Water based product making application in confined places bearable

Color

Primer: Zinc Phosphate and with wide range of light color.
Topcoat: Wide range of colors for industrial usage.

STONE GREY

MISTY GREY

DEEP GREY

GREY WHITE

TELE GREY

Finish

Primer: Low Sheen
Topcoat: Semi-gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMBOND

A Cementitious Surfacer

A non-shrink surface conditioner consisting of portland cement and a specific cationic latex.

  • Designed to be used as a surface conditioner or as a skim coat to smoothen out surfaces, and for the most part to cover up old mosaic or unglazed ceramic tile.
  • Formulated to waterproof, fill and seals pores/voids as well as pointing of all tiles, and masonry surface.
  • Direct application
  • Non-toxic, suitable for potable water tank
  • Excellent adhesion on porous and non-porous surfaces
  • Flexible crack bridging coating
  • Resistant to carbon dioxide and chloride ion diffusion
  • Resistant to weather and mild chemicals

Color

Grey

Finish

Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMFLOR MBS

An Epoxy Based Modified Cement Water Barrier/Underlayment

A water-based epoxy cement screed with specially selected high crushing strength and chemical inert aggregates. It does not require primer and is compatible for over-coating.

  • Designed to use as a vapor barrier layer for epoxy and polyurethane coating.
  • Ideally suited for wet and dry areas such as engineering plants, oil refineries, paint workshops, dairies, foods industries, breweries etc., that are continuously exposed to washing.
  • Also suitable to be used as an underlayment for vinyl tiles laying.
  • Water-based
  • User-friendly
  • Moisture tolerant
  • Effective vapor barrier layer
  • Excellent adhesion and high compressive strength

Color

Amber Grey

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMGUARD HB 500 R

A Chemical Resistant Reactive Nano Silicate Hybrid Coating

A chemical resistant nano silicate hybrid coating which has excellent acid and alkaline resistance. The cured film is tough and thermal shock resistant. It is an eco-friendly product as it contains very little hazardous organic solvent.

  • Exceptional adhesion to a variety of substrate including prepared old/new concrete floor/wall which is free from oil, stains and other contaminants.
  • Areas of application includes chemical lab, battery room, acid/alkaline tank, tank farm lining, sewerage tanks, galvanizing plant and other chemical prone areas.
  • VOC compliance
  • High chemical resistant
  • Fire resistant; cured coating is nonflammable (>500 °C)
  • Extremely hard wearing, behaves like glass when fully cured
  • Water tolerant; product is not sensitive to ground moisture
  • Extremely good adhesion strength even on ill prepared & difficult substrates

Color

CLEAR

Finish

Semi-Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMPROOF CERAMIC

An Insulative And Waterproofing Coating For Timber, Fiber, Mansonry And Metal Works

An emulsion of high grade ceramic polymers containing ceramic particles that doubles as heat and cold dissipating elements.

  • Formulated for used to insulate most building materials from solar heat.
  • Does not require a primer in most cases due to its unique composition.
  • Can be used on timber, fiber, masonry and metal.
  • Can be applied directly to rust to prevent further rusting problem.
  • Water based
  • Attractive Appearance
  • Non Toxic, Non Flammable
  • Built-in rust inhibitor
  • Excellent adhesion, no primer required in most cases
  • Non-Yellowing & High UV resistance
  • Quick drying & Highly Flexible
  • High Solar Reflectivity & Temperature Reduction
  • Corrosion and Abrasion Resistance
  • Cost Saving and Efficient

Color

GREY WHITE

CREAM

WHITE

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CRYSTAL SEAL

A Permanent Waterproofing For Concrete And Mortar By Crystallization

A capillary waterproofing formulation of a proprietary blend of moisture-active chemical, quartz, sand and cement.

  • Ideal for waterproofing concrete and mortar against moisture.
  • Proven material for water tanks, sewage, swimming pools, tunnels, retaining walls, lift pits, balconies, fish ponds, concrete slabs, water treatment structures, wet areas such as toilets & bathrooms, underground shafts, foundations, basements and etc.
  • Environmental friendly; non-toxic
  • Repair and rehabilitate hairline cracks
  • One component & no special protective system is required
  • Removes moisture and reduces the likelihood of corrosion of reinforcing steel in the concrete
  • One component & no special protective system is required
  • Resistance to frost, weathering, salt water, aggressive ground water and many chemicals
  • Non-flammable, inorganic

Color

STONE GREY

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CTE 4

A Coal Tar Epoxy Coating

A high solid, economical and reliable coal tar epoxy polyamide. Excellent for protection of steel and concrete in immersion and offshore services.

  • As a lining for exterior and tank interior carrying sour crude oil, petroleum products & salt water ballast. Also ideal to be used as protection for piping, trenches, sumps and barges.
  • As a heavy-duty coating for steel and concrete surfaces in sewage treatment plants, paper mills, chemical plants etc.
  • Flexible
  • Economical
  • Excellent abrasion resistance
  • Excellent chemical and water resistance

Color

Black

Finish

Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DERMASTIC 900

Liquid Waterproofing Membrane

A flexible liquid waterproofing and sealing membrane, based on modified acrylic polymers. Its latex properties completely resists ozonolysis and other oxidative degradation.

  • Ideal for waterproofing surfaces at non-trafficable areas.
  • Can be used to refurbish and protect asbestos-cement roof sheets from atmospheric corrosion due to weathering and/ or pollution.
  • Economical
  • One component material & no mixing required
  • Economical
  • Ability to resist ozonolysis & other oxidative degradation
  • Full resistant to ultra violet light
  • Outstanding elasticity

Color

Other colors can be matched upon on request.

TELE GREY

GREY WHITE

PASSION GREEN

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAFLOR NWB 21

An Epoxy Cementitous Underlayment

A modified, epoxy cementitious self-leveling underlayment.

  • Designed to be used as a corrective screed or as an underlayment for cementitious and mineral-based substrates.
  • Proven material as a moisture barrier for epoxy flooring. 
  • Can also be used as a repairing material to patch cracks on concrete surfaces and as an underlay for carpet parquet or vinyl coverings. 
  • Non-slip finish
  • Solvent free; low odour
  • High abrasion resistance
  • Seamless and hygienic finish; when sealed, no crevices where dirt and bacteria can dwell
  • Excellent chemical resistance to sugar and acids when topcoat with suitable epoxy / polyurethane toppings
  • Easy to clean and sterilize, low maintenance requirement

Color

LIGHT GREY

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAGARD 104

A High Solid Surface Tolerant Epoxy Coating

A high surface tolerant epoxy enveloping coating. Formulated with exceptional penetrating power that will adhere on surfaces where extensive preparation is not feasible.

  • Resistant to splash, spillage and fumes of acid, alkali, solvent and salt water when top coated with polyurethane coating.
  • Also suitable for food, pharmaceutical, electronics, glove factory and other light industrial plants.
  • Proven material for structural steel, bridges, tank exteriors, piping, roofs, off-shore and other substrate subject to high humidity and moisture.
  • Self priming and surface tolerant
  • Excellent adhesion on most surfaces
  • Versatile, easy to apply and low maintenance
  • Can be further top coated with compatible coatings
  • Resistant to abrasion, chemical and corrosion

Color

LIGHT GREY

OFF WHITE

Finish

Semi Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAGARD VE 98

Modified High Build Epoxy Vinyl Ester Resin For High
Temperature, Solvent And Chemical Resistance Coating Or FRP Lining System

A high build epoxy vinyl ester resins formulated with specially selected curing agents to withstand high temperature exposure, solvent and chemical attacks. A slip resistant texture can also be formulated if desired.

  • Ideally suited for use in tank coating or lining where a high degree of resistance to chemicals, oils and grease is required such as waste water treatment tank lining, chemical manufacturing plants area, chemical drainage gutter or pipe and transportation tank lining.
  • Durable and low maintenance costs
  • High chemical temperature resistance
  • Excellent chemical resistant against a wide range of industrial chemicals
  • Liquid applied
  • Specially formulated for use in hot climate area

Color

Available in White and Coral Brown. Other colors can be matched upon request.

CORAL BROWN

WHITE

Finish

Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAPOL 500

A Pigmented Polyester Urethane Coating

A high performance, pigmented polyester urethane coating with anti slip properties capable to resist chemicals, ultra violet and abrasion.

  • Designed to be used as a protective and decorative finishing top coat to resist against chemical, ultra violet and abrasion.
  • Recommended area of applications include on concrete walls, fascias, doors, timber panels, floors and even aircraft bodies.
  • Also suitable for exterior of tanks, piping, structural steel and concrete surfaces where chemical resistance and weather capability are required.
  • Attractive and versatile; ultimate form of protection and decoration
  • Compliance – BS 476 Part 5, 6 & 7 for Class ‘2’ fire rating
  • Hard wearing – Recommended for use in vandal / graffiti prone areas

Color

Available in wide range of colors upon request.

BUTTER CREAM

WINDOW GREY

BRIGHT GREEN

SIGNAL BLUE

MISTY GREY

Finish

Gloss, Satin, Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.