Showing 1–12 of 23 results

Show sidebar

DURAPOL 500

A Pigmented Polyester Urethane Coating

A high performance, pigmented polyester urethane coating with anti slip properties capable to resist chemicals, ultra violet and abrasion.

  • Designed to be used as a protective and decorative finishing top coat to resist against chemical, ultra violet and abrasion.
  • Recommended area of applications include on concrete walls, fascias, doors, timber panels, floors and even aircraft bodies.
  • Also suitable for exterior of tanks, piping, structural steel and concrete surfaces where chemical resistance and weather capability are required.
  • Attractive and versatile; ultimate form of protection and decoration
  • Compliance – BS 476 Part 5, 6 & 7 for Class ‘2’ fire rating
  • Hard wearing – Recommended for use in vandal / graffiti prone areas

Color

Available in wide range of colors upon request.

BUTTER CREAM

WINDOW GREY

BRIGHT GREEN

SIGNAL BLUE

MISTY GREY

Finish

Gloss, Satin, Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

RUSTGARD 107

An Inhibitive Epoxy Primer

A premium grade, rust inhibitive epoxy primer for steel surfaces.

  • Specially formulated for use as a primer and to be further top coated with other compatible epoxy coatings.
  • Proven material for the protection of steel, tank exteriors, bridges, conveyors, offshore platforms, marine structures and any aggressive industrial and marine environments.
  • Economical
  • Provides a long term corrosion protection to steel substrates
  • Quick drying & can be top coated after 3 hours of curing at 30ºC
  • Compatible with most epoxy and polyurethane coatings

Color

Red Oxide

White

Finish

Flat

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

EPOFIX 713 EPIS (UW)

Underwater Epoxy Resin Injection

An underwater grade, low viscosity epoxy adhesive formulated to seal and repair fine cracks in concrete as to restore the concrete’s structural strength.

  • Specially formulated for underwater or marine structure applications.
  • The cured adhesive will seal the cracks entirely and completely restores the concrete to its original monolithic condition.
  • Also suitable to be used as a repairing material for rebounding of delamination in concrete toppings, grouting of bolts, anchor bars etc and consolidation of friable rocks and stones.
  • Fast cure
  • High strength
  • Low viscosity, ready to flow
  • Excellent adhesion even on damp surfaces
  • Low reactivity thus reduces exothermic heat generation

Color

Amber Brownish

Finish

Flat

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

PVC COAT 400 WB

An Environmental Friendly, Heavy Duty Rust Inhibitive Pigmented Hybrid Coating

An environment friendly, heavy duty, rust inhibitive pigmented hybrid coating designed to be directly applied onto hot dip galvanized steel surface.

  • Specially formulated as a high perfomance protective topcoat for galvanized steel works.
  • Approved by the Department of Civil Aviation, Malaysia for on site application to galvanized steel transmission and communication towers for its visibility and safety.(Ref.: DCA/P/4/1.27)
  • Easy application
  • Anti corrosion
  • Excellent chemical resistance
  • Excellent adhesion
  • No fire hazard during storage and application
  • Environmental friendly
  • Excellent film build up & durability

Color

Available in Standard Flooring colors. Other colors can be matched upon request.

ZINC GREY

ORANGE

WHITE

Finish

Satin

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMGUARD HB 500 R

A Chemical Resistant Reactive Nano Silicate Hybrid Coating

A chemical resistant nano silicate hybrid coating which has excellent acid and alkaline resistance. The cured coating is tough and thermal shock resistant. It is an eco-friendly product as it contains very little hazardous organic solvent.

  • Exceptional adhesion to a variety of substrate including prepared old/new concrete floor/wall which is free from oil, stains and other contaminants.
  • Areas of application includes chemical lab, battery room, acid/alkaline tank, tank farm lining, sewerage tanks, galvanizing plant and other chemical prone areas.
  • VOC compliance
  • High chemical resistant
  • Fire resistant; cured coating is nonflammable (>500 °C)
  • Extremely hard wearing, behaves like glass when fully cured
  • Water tolerant; product is not sensitive to ground moisture

Color

CLEAR

Finish

Semi-Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

EPOLINE 139

A Non-Toxic, Potable Water Tank Lining

A high solid, non-toxic epoxy tank and surface lining.

  • A non-toxic coating to concrete and steel surfaces which are both chemical and corrosion resistant.
  • Designed to be used as water, fuel, ballast and storage tank lining.
  • Also applicable to hopper cars, cement mixer, silos, oil tanker, reservoirs, tanks and food processing environments.
  • High build in 2 coats.
  • Anti-corrosion
  • Safe food grade product
  • BS 6920 compliance
  • Reliable and low maintenance
  • Self priming – used as primer / top coat
  • Highly resistant to chemical and abrasion

Color

Available in white and light blue. Other colors can be matched upon request.

WHITE

DEEP BLUE

LIGHT BLUE

Finish

Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAGARD VE 98

Modified High Build Epoxy Vinyl Ester Resin For High
Temperature, Solvent And Chemical Resistance Coating Or FRP Lining System

A high build epoxy vinyl ester resins formulated with specially selected curing agents to withstand high temperature exposure, solvent and chemical attacks. A slip resistant texture can also be formulated if desired.

  • Ideally suited for use in tank coating or lining where a high degree of resistance to chemicals, oils and grease is required such as waste water treatment tank lining, chemical manufacturing plants area, chemical drainage gutter or pipe and transportation tank lining.
  • Durable and low maintenance costs
  • High chemical temperature resistance
  • Excellent chemical resistant against a wide range of industrial chemicals
  • Liquid applied
  • Specially formulated for use in hot climate area

Color

Available in White and Coral Brown. Other colors can be matched upon request.

CORAL BROWN

WHITE

Finish

Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAGARD 104

A High Solid Surface Tolerant Epoxy Coating

A high surface tolerant epoxy enveloping coating. Formulated with exceptional penetrating power that will adhere on surfaces where extensive preparation is not feasible.

  • Resistant to splash, spillage and fumes of acid, alkali, solvent and salt water when top coated with polyurethane coating.
  • Also suitable for food, pharmaceutical, electronics, glove factory and other light industrial plants.
  • Proven material for structural steel, bridges, tank exteriors, piping, roofs, off-shore and other substrate subject to high humidity and moisture.
  • Self priming and surface tolerant
  • Excellent adhesion on most surfaces
  • Versatile, easy to apply and low maintenance
  • Can be further top coated with compatible coatings
  • Resistant to abrasion, chemical and corrosion

Color

LIGHT GREY

OFF WHITE

Finish

Semi Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURATHANE 515

An Aliphatic Polyurethane Coating

An aliphatic polyurethane coating that cures to a gloss, tile-like finish.

  • Formulated for protection of exterior of tanks, piping, structural steel and concrete surfaces where chemical resistance and weather capability are required.
  • An excellent coating to be used in chemical processing, pulp and paper, petrochemical, offshore drilling and similar demanding industries.
  • High chemical resistant
  • High gloss and colour retention
  • Excellent weatherability
  • High abrasion resistance
  • Excellent flexibility

Color

Available in wide range of colors.

Finish

High Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DERMASTIC 900

Liquid Waterproofing Membrane

A flexible liquid waterproofing and sealing membrane, based on modified acrylic polymers. Its latex properties completely resists ozonolysis and other oxidative degradation.

  • Ideal for waterproofing surfaces at non-trafficable areas.
  • Can be used to refurbish and protect asbestos-cement roof sheets from atmospheric corrosion due to weathering and/ or pollution.
  • Economical
  • One component material & no mixing required
  • Economical
  • Ability to resist ozonolysis & other oxidative degradation
  • Full resistant to ultra violet light
  • Outstanding elasticity

Color

Other colors can be matched upon on request.

TELE GREY

GREY WHITE

PASSION GREEN

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CRYSTAL SEAL

A Permanent Waterproofing For Concrete And Mortar By Crystallization

A capillary waterproofing formulation of a proprietary blend of moisture-active chemical, quartz, sand and cement.

  • Ideal for waterproofing concrete and mortar against moisture.
  • Proven material for water tanks, sewage, swimming pools, tunnels, retaining walls, lift pits, balconies, fish ponds, concrete slabs, water treatment structures, wet areas such as toilets & bathrooms, underground shafts, foundations, basements and etc.
  • Environmental friendly; non-toxic
  • Repair and rehabilitate hairline cracks
  • One component & no special protective system is required
  • Removes moisture and reduces the likelihood of corrosion of reinforcing steel in the concrete
  • One component & no special protective system is required
  • Resistance to frost, weathering, salt water, aggressive ground water and many chemicals
  • Non-flammable, inorganic

Color

STONE GREY

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMBOND

A Cementitious Surfacer

A non-shrink surface conditioner consisting of portland cement and a specific cationic latex.

  • Designed to be used as a surface conditioner or as a skim coat to smoothen out surfaces, and for the most part to cover up old mosaic or unglazed ceramic tile.
  • Formulated to waterproof, fill and seals pores/voids as well as pointing of all tiles, and masonry surface.
  • Direct application
  • Non-toxic, suitable for potable water tank
  • Excellent adhesion on porous and non-porous surfaces
  • Flexible crack bridging coating
  • Resistant to carbon dioxide and chloride ion diffusion
  • Resistant to weather and mild chemicals

Color

Grey

Finish

Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.