Showing 1–12 of 54 results

Show sidebar

AQUAREX 1001

A Water Dispersed Epoxy Coating

A water dispersed epoxy coating formulated to provide a durable coating system for walls and floors that are subjected to light traffic.

  • Ideal to be used at site where solvent-based material is not desirable.
  • For protection of surfaces against dusting, solvent and certain chemical attack.
  • Formulated for use at light to medium traffic areas where hygiene and cleanliness are of importance.
  • Proven material for clean rooms, food processing plants, assembly plants, pharmaceuticals, warehouse, garages, etc.
  • Hygienic – dust free surfaces.
  • Solvent-free – makes application in confined places bearable.
  • Food grade – non-solvent and non-toxic. Meets BS 6920-1988 (Part 1) requirement.
  • Hard wearing – good abrasion resistance for foot and light vehicular traffic.

Color

Available in Standard Flooring colors and in clear. Other colors can be matched upon request.

MID BLUE

PASSION GREEN

BUTTER CREAM

ANTIQUE PINK

TELE GREY

Finish

Satin

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

AQUAREX 1001 AS

A Water Dispersed Anti Static Epoxy Coating

A water dispersed epoxy coating filled with conductive filler installed during priming.

  • To provide a hard wearing, seamless, and totally conductive anti-static flooring and wall coating system.
  • Easy to apply
  • Excellent adhesive
  • Solvent free – makes application in confined places bearable
  • Less sensitive to moisture during application
  • Meets BS 2050 Antistatic Requirements
  • Meets BS 6920-1988 (Part 1) Requirements

Color

Available in Standard Flooring colors. Other colors can be matched upon request.

BRIGHT GREEN

GREY WHITE

TELE GREY

STONE GREY

MISTY GREY

Finish

Semi Gloss to Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

AQUAREX 1001 NWB (II)

A Water Dispersed Ceramic Epoxy Coating

A high build, water dispersed ceramic epoxy coating with antibacterial properties.

  • Ideal to be used at site where solvent-based material is not desirable.
  • For protection of surfaces against dusting, solvent, chemical attack.
  • Hard wearing and abrasion resistant with has good anti carbonation properties.
  • Recommended product for hospital, clinics, food processing plant for its board range of antibacterial properties.
  • Breathable.
  • Good Anti Carbonation.
  • Excellent adhesion and abrasion resistance.
  • Less sensitive to moisture during application.
  • Fast dry / open time even at low temperature.
  • Compatible with cementitious as well as asphaltic.
  • Solventless – makes application in confined places bearable.

Color

Available in Standard Flooring Colors. Other colors can be matched upon request.

TELE GREY

MISTY GREY

DEEP GREY

BRIGHT GREEN

BUTTER CREAM

Finish

Satin, Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

AQUAREX EPH

A water dispersed, hybrid epoxy coating formulated using the latest hybrid technology to deliver superior adhesion, abrasion and water tolerant properties.

  • Formulated for use on walls and floors of hangars, warehouses, garages, manufacturing facilities, clean rooms, car parks, walkway and other light to medium traffic areas.
  • Economical
  • Hygienic – easy to clean and maintain
  • Durable – excellent abrasion resistance
  • Attractive
  • Odorless
  • Environmental Friendly

Color

Available in pigmented and clear for glazing.

LIGHT GREY

DARK GREY

GREEN

BROWN BEIGE

CREAM

Finish

Satin

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

AQUAREX NG

A Water Dispersed Non-Gassing Epoxy Coating

A non-gassing, water dispersed epoxy to be used as a primer or top coat.

  • Ideal to be used at site where solvent-based material is not desirable.
  • Formulated for use at light industrial areas where controlled hygiene and cleanliness are of importance.
  • Ideal for use as floor and wall coating in high level manufacturing and highly sensitive areas such as electronics, semi-conductors, precision, calibrating, assembly plant, pharmaceutical and clean room
  • Reliable and economical
  • Resistant to wide range of chemicals
  • Meet BS 6920-1988 (Part 1) requirement
  • Less sensitive to moisture during application
  • Water based product makes application in confined places bearable
  • Compatible with cementitious as well as asphaltic substrate
  • Does not leach toxic ingredients after cured and does not contain any amine, ammonia or solvent

Color

Available in Standard Flooring colors. Other colors can be matched upon request.

GREY WHITE

TELE GREY

BUTTER CREAM

CREAM

BRIGHT GREEN

Finish

Satin

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMGUARD HB 500

A Reactive Nano Silicate Hybrid Coating

A hybrid coating which is synthesized of inorganic component as a main component and organic component as a subcomponent with molecular unit reaction. It is an eco-friendly product which contains very little hazardous organic solvent.

  • Exceptional adhesion to a variety of substrate including prepared old/new concrete floors which are free from oil, stain and other contaminants.
  • Area of application includes car parking lot, aircraft hangar, machinery room, utility room, maintenance room, factory, warehouse, chemical lab, general office and food processing plant.
  • Chemical/oil resistant
  • Anti stain, Anti-Graffiti
  • Fire resistant – cured coating is nonflammable (>500 °C)
  • Extremely hard wearing
  • Water tolerant – product is not sensitive to ground moisture
  • Excellent adhesion
  • Not sensitive to high humidity and low temperature

Color

Available in standard colors and clear.

CREAM

RED

GREEN

DARK GREY

BROWN BEIGE

Finish

Semi Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMGUARD HB 500 ANTI-SLIP

A Reactive Nano Silicate Anti-Slip Coating

A hybrid coating which is synthesized of inorganic component as a main component and organic component as a sub component with molecular unit reaction. It is has been designed to provide an anti-slip profile while also being an eco-friendly product which contains very little hazardous organic solvent.

  • Exceptional adhesion to a variety of substrate including prepared old/new concrete floors which are free from oil, stain and other contaminants.
  • Area of application includes car parking lot, aircraft hangar, machinery room, utility room, maintenance room, factory, warehouse, chemical lab, general office and food processing plant.
  • Enhanced traction
  • VOC compliance
  • Anti-stain, Anti-graffiti
  • Fire resistant, cured coating is nonflammable (>500 °C)
  • Water tolerant, product is not sensitive to ground moisture.
  • Product is not sensitive to high humidity and low temperature during application.

Color

Available in standard colors and clear.

DARK GREY

CREAM

BROWN BEIGE

RED

GREEN

Finish

Semi-Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMGUARD HB 500 AS

A Conductive Reactive Nano Silicate Hybrid Coating

A hybrid coating which is synthesized of inorganic component as a main component along with a conductive undercoat to prevent electrostatic build-up in sensitive areas.

  • Provides exceptional adhesion to a variety of substrate including prepared old/new concrete floors which are free from oil, stains and other contaminants.
  • Area of application includes car parking lot, aircraft hangars, machinery room, utility room, maintenance room, factory, warehouse, chemical lab, general office and food processing plant.
  • Water tolerant – product is not sensitive to ground moisture
  • Product is not sensitive to high humidity and low temperature during application
  • Provides protection against both chemical and mechanical attack
  • VOC compliance
  • Chemical/oil resistant
  • Anti-Stain, Anti-Graffiti
  • Fire resistant – cured coating is non-flammable (>500 °C)
  • Extremely hard wearing, behave like glass when fully cured

Color

Available in Standard Flooring colors.

DARK GREY

CREAM

BROWN BEIGE

RED

GREEN

Finish

Semi Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMGUARD HB 500 R

A Chemical Resistant Reactive Nano Silicate Hybrid Coating

A chemical resistant nano silicate hybrid coating which has excellent acid and alkaline resistance. The cured coating is tough and thermal shock resistant. It is an eco-friendly product as it contains very little hazardous organic solvent.

  • Exceptional adhesion to a variety of substrate including prepared old/new concrete floor/wall which is free from oil, stains and other contaminants.
  • Areas of application includes chemical lab, battery room, acid/alkaline tank, tank farm lining, sewerage tanks, galvanizing plant and other chemical prone areas.
  • VOC compliance
  • High chemical resistant
  • Fire resistant; cured coating is nonflammable (>500 °C)
  • Extremely hard wearing, behaves like glass when fully cured
  • Water tolerant; product is not sensitive to ground moisture

Color

CLEAR

Finish

Semi-Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

COLORFLAKE ML

An Attractive Colorflake Epoxy Multi-Layer System

A multi-layered broadcast color flake system designed to provide the look of granite to flooring surfaces while providing substrate protection from slips, abrasion, wear, and chemical attack.

  • An ideal system which can give floors and walls a very exclusive appearance.
  • Ideal for showrooms, hotels and restaurants, boutiques, sales rooms, reception and main entrance, retail stores and even bathrooms where a low maintenance, seamless floor that is an alternative to vinyl tile is desired.
  • Can be applied straight on existing vinyl tiles
  • Excellent bond strength and abrasion resistance
  • Coving can be added as an integral part of flooring
  • Solvent-free thus eliminating any unpleasant and harmful odor
  • Aesthetically attractive and slip resistant
  • Fast and easy application which reduces downtime
  • Hygienic and chemical resistance

Color

Available in a range of standard color combinations. Other colors can be matched upon request.

Finish

Gloss, Satin, Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CTE 4

A Coal Tar Epoxy Coating

A high solid, economical and reliable coal tar epoxy polyamide. Excellent for protection of steel and concrete in immersion and offshore services.

  • As a lining for exterior and tank interior carrying sour crude oil, petroleum products & salt water ballast. Also ideal to be used as protection for piping, trenches, sumps and barges.
  • As a heavy-duty coating for steel and concrete surfaces in sewage treatment plants, paper mills, chemical plants etc.
  • Flexible
  • Economical
  • Excellent abrasion resistance
  • Excellent chemical and water resistance

Color

Black

Finish

Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

D’LINE 302

A Pigmented Acrylic Road Marking

A silicone, acrylic-based road marking filled with ceramic powder for extra wear resistance performance.

  • Formulated especially for road markings or car parks demarcation, road dividers and other safety warning purposes.
  • Excellent adhesion
  • Fast dry; shorter traffic opening time
  • Excellent wear resistance
  • Enhanced light retroflectibility
  • Good flexibility

Color

Standard D’LINE colors. Special colors can be matched upon request.

MID BLUE

BRIGHT GREEN

BUTTER CREAM

STONE GREY

DEEP GREY

Finish

Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.