Showing all 7 results

Show sidebar

HYDRAFOAM PU

A Polyurethane Foam Injection

A hydrophobic polyurethane grout designed to stop water leakages.

  • Typically injected into cracks in concretes, honeycombed concretes, soils, pipes, pipe intrusions and other voids by use of a high pressure pump.
  • Stop water leaks coming through cracked or honey-combed concrete voids between wall floor, wall and ceiling, expansion joints, cold joints and pipe intrusions.
  • It is used to repair concrete walls, ceilings and floors that are leaking; in tunnels, including limestone, manholes, sewer lines and in concrete dams.
  • Seals water carrying cracks
  • It can be applied using suitable high or low pressure injection packers.
  • Low viscosity
  • The expansion rate of the material is 20 times of its own volume.

Color

Dark Amber

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

EPOFIX 713 EPIS

Injection Grade Epoxy Resin

A low viscosity epoxy adhesive formulated to seal and repair fine cracks in concrete as to restore the concrete’s structural strength.

  • Designed to be used as a repairing material for cracked concrete.
  • The cured adhesive will seal the cracks entirely and completely restores the concrete to its original monolithic condition.
  • Rebounding of delamination in concrete thus avoiding costly replacements
  • Consolidation of friable rocks and stones

    Color

    Brownish-Amber.

    Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

    EPOFIX 712 LW

    Low Weight Structural Epoxy Adhesive

    A thixotropic 100% solid two component, high modulus, high strength adhesive for structural jointing and strengthening.

    • Ideally used as adhesive for structural bonding, jointing of pre-cast segmented bridge units, adhesive for external steel plate bonding and adhesive for composite strengthening.
    • It also recommended using on vertical surfaces.
    • 100% Solid, odorless
    • Excellent cohesive bond
    • Can be applied on vertical and horizontal surfaces
    • Good adhesion to concrete, steel, timber, glass, rubber and carbon fiber
    • High mechanical strength

    Color

    Grey.

    Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

    EPOFIX 712 LV

    Low Viscosity Liquid Epoxy Adhesive Mortar

    A low viscosity epoxy adhesive / mortar which is specially formulated as structural adhesive for bonding plastics, brick, timber, ceramic, metals, particle board and concrete.

    • Formulated to patch, fill and seals  void/cracks of all concrete, timber, ceramic, metal or plastic surface.
    • Areas such as basement, RC gutter, toilet/bathroom, kitchen, planter box, water tank/reservoirs, fountains and roof.
    • Excellent Bonding Strength
    • Easy to use
    • High adhesion to concrete, timber, ceramic, metal or even plastic.
    • Good mechanical strength
    • Good weatherability
    • Good resistance against oil, solvent and other chemicals

    Color

    In Amber or Grayish-Transparent.

    Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

    EPOFIX 712 GP

    General Purpose Epoxy Adhesive

    A 100% Solids, two part resin general purpose epoxy mortar system for general repair work.

    • Specially formulated as a structural adhesive for bonding plastics, bricks, timber, ceramic, metals, particle board and concrete.
    • Used to patch, fill and seals voids/cracks of all concrete, timber, ceramic, metal or plastic surface,
    • e.g. – Patching spelled or honeycombs, protecting exposed reinforcement, reinstating damagedarises and repairing damaged precast concrete building units.
    • Excellent Bonding Strength
    • Easy to use
    • Perfect adhesion to concrete, timber, ceramic,metal or even plastic.
    • Good mechanical strength

    Color

    In Amber or Grayish-Transparent.

    Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

    CEMBOND

    A Cementitious Surfacer

    A non-shrink surface conditioner consisting of portland cement and a specific cationic latex.

    • Designed to be used as a surface conditioner or as a skim coat to smoothen out surfaces, and for the most part to cover up old mosaic or unglazed ceramic tile.
    • Formulated to waterproof, fill and seals pores/voids as well as pointing of all tiles, and masonry surface.
    • Direct application
    • Non-toxic, suitable for potable water tank
    • Excellent adhesion on porous and non-porous surfaces
    • Flexible crack bridging coating
    • Resistant to carbon dioxide and chloride ion diffusion
    • Resistant to weather and mild chemicals

    Color

    Grey

    Finish

    Matt

    Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

    CEMFLOR MBS

    An Epoxy Based Modified Cement Water Barrier/Underlayment

    A water-based epoxy cement screed with specially selected high crushing strength and chemical inert aggregates. It does not require primer and is compatible for over-coating.

    • Designed to use as a vapor barrier layer for epoxy and polyurethane coating.
    • Ideally suited for wet and dry areas such as engineering plants, oil refineries, paint workshops, dairies, foods industries, breweries etc., that are continuously exposed to washing.
    • Also suitable to be used as an underlayment for vinyl tiles laying.
    • Water-based
    • User-friendly
    • Moisture tolerant
    • Effective vapor barrier layer
    • Excellent adhesion and high compressive strength

    Color

    Amber Grey

    Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.