A high performance, pigmented polyester urethane coating with anti-slip properties capable to resist chemicals, ultra violet and abrasion.
Providing protection to Hangars subjected to jet fuels and hydraulic fluid, reducing concrete cancer; Car parks subjected to automotive oils, abrasion from heavy vehicle traffic as well as water ingress.
Close
DURAPOL 500 ANTI-SLIP
A Pigmented Polyester Urethane Anti-Slip Coating
- A protective and decorative top coat
- Designed as a finishing coat to resist chemicals, ultra violet and abrasion.
- Suitable for concrete surfaces where chemical resistance and weather capability are required.
- Anti-slip
- Outstanding gloss and color retention. (Attractive)
- Versatility in design
- Compliance for Class ‘2’ fire rating
- Hard wearing for use in vandal/ graffiti prone areas
Color
Available in wide range of colors upon request.
BUTTER CREAM
WINDOW GREY
BRIGHT GREEN
SIGNAL BLUE
MISTY GREY
Finish
Gloss, Satin, Matt.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURADECK
A solvent free, semi-flexible, trafficable polyurethane deck coating system that provides a non skid and minimal noise generation while elevating the appearance with multi colors.
- Designed to be used for car parks, garage, auto service center and other high traffic facilities.
- Non skid, non dusting & has excellent abrasion resistance
- Minimum noise generation
- Aesthetically attractive with multi colors
- Excellent bonding strength & crack bridging ability
- 100% UV light stable- non yellowing
- Excellent resistance to cleaning detergent, engine oil, battery acid, hydraulic fluid, fuel, etc.
Color
Available in Standard Flooring Colors. Other colors can be matched upon request.
DEEP GREY
STONE GREY
MISTY GREY
CREAM
GREEN
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
CEMGUARD HB 500
A hybrid coating which is synthesized of inorganic component as a main component and organic component as a subcomponent with molecular unit reaction. It is an eco-friendly product which contains very little hazardous organic solvent.
- Exceptional adhesion to a variety of substrate including prepared old/new concrete floors which are free from oil, stain and other contaminants.
- Area of application includes car parking lot, aircraft hangar, machinery room, utility room, maintenance room, factory, warehouse, chemical lab, general office and food processing plant.
- Chemical/oil resistant
- Anti stain, Anti-Graffiti
- Fire resistant – cured coating is nonflammable (>500 °C)
- Extremely hard wearing
- Water tolerant – product is not sensitive to ground moisture
- Excellent adhesion
- Not sensitive to high humidity and low temperature
Color
Available in standard colors and clear.
CREAM
RED
GREEN
DARK GREY
BROWN BEIGE
Finish
Semi Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
AQUAREX 1001
A Water Dispersed Epoxy Coating
A water dispersed epoxy coating formulated to provide a durable coating system for walls and floors that are subjected to light traffic.
- Ideal to be used at site where solvent-based material is not desirable.
- For protection of surfaces against dusting, solvent and certain chemical attack.
- Formulated for use at light to medium traffic areas where hygiene and cleanliness are of importance.
- Proven material for clean rooms, food processing plants, assembly plants, pharmaceuticals, warehouse, garages, etc.
- Hygienic – dust free surfaces.
- Solvent-free – makes application in confined places bearable.
- Food grade – non-solvent and non-toxic. Meets BS 6920-1988 (Part 1) requirement.
- Hard wearing – good abrasion resistance for foot and light vehicular traffic.
Color
Available in Standard Flooring colors and in clear. Other colors can be matched upon request.
MID BLUE
PASSION GREEN
BUTTER CREAM
ANTIQUE PINK
TELE GREY
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
AQUAREX 1001 NWB (II)
A Water Dispersed Ceramic Epoxy Coating
A high build, water dispersed ceramic epoxy coating with antibacterial properties.
- Ideal to be used at site where solvent-based material is not desirable.
- For protection of surfaces against dusting, solvent, chemical attack.
- Hard wearing and abrasion resistant with has good anti carbonation properties.
- Recommended product for hospital, clinics, food processing plant for its board range of antibacterial properties.
- Breathable.
- Good Anti Carbonation.
- Excellent adhesion and abrasion resistance.
- Less sensitive to moisture during application.
- Fast dry / open time even at low temperature.
- Compatible with cementitious as well as asphaltic.
- Solventless – makes application in confined places bearable.
Color
Available in Standard Flooring Colors. Other colors can be matched upon request.
TELE GREY
MISTY GREY
DEEP GREY
BRIGHT GREEN
BUTTER CREAM
Finish
Satin, Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
AQUAREX EPH
A water dispersed, hybrid epoxy coating formulated using the latest hybrid technology to deliver superior adhesion, abrasion and water tolerant properties.
- Formulated for use on walls and floors of hangars, warehouses, garages, manufacturing facilities, clean rooms, car parks, walkway and other light to medium traffic areas.
- Economical
- Hygienic – easy to clean and maintain
- Durable – excellent abrasion resistance
- Attractive
- Odorless
- Environmental Friendly
Color
Available in pigmented and clear for glazing.
LIGHT GREY
DARK GREY
GREEN
BROWN BEIGE
CREAM
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOCOTE 104 SP
A Solvent Free Epoxy Resin Coating
A solvent free and easy to apply epoxy resin coating. When cured, it forms a gloss, seamless and impervious finish which is easily cleaned.
- Can be applied on all cementitious floor substrates subjected to semi heavy mechanical loads.
- Recommended to use as a protective and lining coating on both vertical and horizontal surfaces.
- Hygienic – easy to clean
- Good abrasion resistance for semi heavy mechanical loads
- Excellent adhesion
Color
Available in Standard Flooring Colors. Other colors can be matched upon request.
CREAM
SIGNAL BLUE
BRIGHT GREEN
TELE GREY
STONE GREY
Finish
Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOCOTE 106 HB
A General Purposed Epoxy Coating
A durable, easy to apply, high build polyamide cured epoxy resin coating. When cured, forms a semi-gloss, impervious finish which is easily cleaned and maintained.
- Formulated for floors and walls where high level of aesthetic value and chemical resistance are required.
- Can be applied on concrete, masonry, timber, etc.
- A hygienic, dust free surface
- Hard wearing for foot and light vehicular traffic
- Excellent adhesion strength
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
GREY WHITE
MISTY GREY
BUTTER CREAM
BRICK RED
DEEP BLUE
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.