General Purpose Epoxy Adhesive
Close
EPOFIX 712 GP
A 100% Solids, two part resin general purpose epoxy mortar system for general repair work.
- Specially formulated as a structural adhesive for bonding plastics, bricks, timber, ceramic, metals, particle board and concrete.
- Used to patch, fill and seals voids/cracks of all concrete, timber, ceramic, metal or plastic surface,
- e.g. – Patching spelled or honeycombs, protecting exposed reinforcement, reinstating damagedarises and repairing damaged precast concrete building units.
- Excellent Bonding Strength
- Easy to use
- Perfect adhesion to concrete, timber, ceramic,metal or even plastic.
- Good mechanical strength
Color
In Amber or Grayish-Transparent.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOFIX 712 LV
Low Viscosity Liquid Epoxy Adhesive Mortar
A low viscosity epoxy adhesive / mortar which is specially formulated as structural adhesive for bonding plastics, brick, timber, ceramic, metals, particle board and concrete.
- Formulated to patch, fill and seals void/cracks of all concrete, timber, ceramic, metal or plastic surface.
- Areas such as basement, RC gutter, toilet/bathroom, kitchen, planter box, water tank/reservoirs, fountains and roof.
- Excellent Bonding Strength
- Easy to use
- High adhesion to concrete, timber, ceramic, metal or even plastic.
- Good mechanical strength
- Good weatherability
- Good resistance against oil, solvent and other chemicals
Color
In Amber or Grayish-Transparent.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOFIX 712 LW
Low Weight Structural Epoxy Adhesive
A thixotropic 100% solid two component, high modulus, high strength adhesive for structural jointing and strengthening.
- Ideally used as adhesive for structural bonding, jointing of pre-cast segmented bridge units, adhesive for external steel plate bonding and adhesive for composite strengthening.
- It also recommended using on vertical surfaces.
- 100% Solid, odorless
- Excellent cohesive bond
- Can be applied on vertical and horizontal surfaces
- Good adhesion to concrete, steel, timber, glass, rubber and carbon fiber
- High mechanical strength
Color
Grey.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOFIX 713 EPIS
Injection Grade Epoxy Resin
A low viscosity epoxy adhesive formulated to seal and repair fine cracks in concrete as to restore the concrete’s structural strength.
- Designed to be used as a repairing material for cracked concrete.
- The cured adhesive will seal the cracks entirely and completely restores the concrete to its original monolithic condition.
- Rebounding of delamination in concrete thus avoiding costly replacements
- Consolidation of friable rocks and stones
Color
Brownish-Amber.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOFIX 713 EPIS (UW)
Underwater Epoxy Resin Injection
An underwater grade, low viscosity epoxy adhesive formulated to seal and repair fine cracks in concrete as to restore the concrete’s structural strength.
- Specially formulated for underwater or marine structure applications.
- The cured adhesive will seal the cracks entirely and completely restores the concrete to its original monolithic condition.
- Also suitable to be used as a repairing material for rebounding of delamination in concrete toppings, grouting of bolts, anchor bars etc and consolidation of friable rocks and stones.
- Fast cure
- High strength
- Low viscosity, ready to flow
- Excellent adhesion even on damp surfaces
- Low reactivity thus reduces exothermic heat generation
Color
Amber Brownish
Finish
Flat
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOMASTIC 109
A Heavy-Duty Epoxy Coal Tar Coating
A high build, heavy duty epoxy coal tar coating. Excellent for protection of concrete and steel in immersion and offshore services.
- Specially formulated for protection of offshore structures, marine installations and pilings.
- As a lining for exterior and tank interior carrying sour crude oil, petroleum products & salt water ballast. Also ideal to be used as protection for piping, trenches, sumps & concrete-splash blocks.
- As a heavy-duty coating for steel and concrete surfaces in sewage treatment plants, paper mills, chemical plants etc.
- Excellent protection for underground surfaces
- Simple 1:1 mixing ratio
- Chemical Resistance
- Very good abrasion resistance
Color
BLACK
Finish
Flat
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOZINC 258
A High Build Zinc Rich Epoxy Primer
A high build, zinc-rich primer based on epoxy with excellent abrasion resistance that provides a long term corrosion protection to steel substrates.
- Specially formulated to be used for maintenance or re-coating of inorganic zinc silicate primed areas.
- Can also be used as a general zinc primer for galvanized steels and structural steel works.
- Area of application includes chemical processing plant, exteriors of containers, paper mills, offshore platforms, refineries, marine structures, hulls, jetty piles and ship bottoms.
- Fast drying
- Quick and easy handling
- Forms a durable coat compatible with a wide range of topcoats
Color
Zinc Grey
Finish
Flat
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
FLORAX 3001 AS
An Anti Static Pigmented Floor Wax
An anti static, pigmented polymeric emulsion with excellent adhesion properties.
- Reduce and/ or eliminate buildup of static electricity on concrete substrates, including old concrete floors which have been cleaned but retain some embedded stains of dirt and oil.
- Has greater advantage over solvent-borne system in ease of cleaning up and the capability to meet health, safety and environmental standards.
- Ideal for any manufacturing plants that requires normal static electricity control.
- Easy to apply as it’s a one component product
- Fast dry and requires not thinning
- Water based – VOC compliant
- Abrasion resistance : Fair
- Scuff resistance : Good
Color – Top Coat
Available in Standard Flooring colors. Other colors can be matched upon request.
PASTEL GREEN
BRIGHT GREEN
WHITE GREY
TELE GREY
STONE GREY
COLOR – Primer
Black Only
Finish
Semi-Low Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
FLORAX 3001 PLUS
A Hybrid Water-Based Acrylic Coating
A water-based floor/ wall sealer & surface hardener. Manufactured based on state of the art hybrid acrylic technology, it has exceptional adhesion, abrasion and weather resistance properties. This product is also highly breathable.
- Specially formulated to adhere on a variety of substrates, including ceramic tiles, natural stone, terrazzo & polished concrete which are properly prepared.
- Due to its high chemical and abrasion resistance, it is highly recommended to use as an anti graffiti wall coating.
- Also recommended to use as an anti carbonation coating for building structures.
- Areas of application include car parks, warehouses, HUT rooms, laboratory, exhibition hall, hospitals, schools, sports complex and etc.
- Excellent adhesion
- Good scuff resistance
- One component product & fast dry
- Excellent abrasion resistance
- Water based – VOC compliant
- UV and weather resistant : minimum yellowing
Color
Available in standard flooring colors and in clear. Other color can be matched upon request.
BRICK RED
PASTEL GREEN
BRIGHT GREEN
CREAM
ANTIQUE PINK
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
GLASCRETE
An Exposed Glass Aggregate Finish
A ready-to-use, colored or uncolored (depending on desired effect) mix of cement, silica sand, admixtures, and decorative glass designed for application by the dry shake method over freshly poured concrete surfaces.
- Used as a hard-wearing and abrasion-resistant floor finish for landscapes and/or interior spaces while preserving the structural integrity of the concrete and the look of natural materials.
- An economical way to create attractive and highly decorative plazas, walkways, pool decks, and driveways.
- Available in an unlimited variety of colors and aggregates
- A highly decorative and anti-slip finish
- Applicable to both exterior and Interior application.
- Unlimited choice of combination with aggregates.
- Economical, easy to clean and maintain.
- Wear and abrasion resistance
- Oil and grease resistant
Color
Available in various colors.
Finish
As per the glass aggregate texture exposed by the dry shake method topped with glaze coat.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
HYDRAFOAM PU
A Polyurethane Foam Injection
A hydrophobic polyurethane grout designed to stop water leakages.
- Typically injected into cracks in concretes, honeycombed concretes, soils, pipes, pipe intrusions and other voids by use of a high pressure pump.
- Stop water leaks coming through cracked or honey-combed concrete voids between wall floor, wall and ceiling, expansion joints, cold joints and pipe intrusions.
- It is used to repair concrete walls, ceilings and floors that are leaking; in tunnels, including limestone, manholes, sewer lines and in concrete dams.
- Seals water carrying cracks
- It can be applied using suitable high or low pressure injection packers.
- Low viscosity
- The expansion rate of the material is 20 times of its own volume.
Color
Dark Amber
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
PVC COAT 400 WB
An Environmental Friendly, Heavy Duty Rust Inhibitive Pigmented Hybrid Coating
An environment friendly, heavy duty, rust inhibitive pigmented hybrid coating designed to be directly applied onto hot dip galvanized steel surface.
- Specially formulated as a high perfomance protective topcoat for galvanized steel works.
- Approved by the Department of Civil Aviation, Malaysia for on site application to galvanized steel transmission and communication towers for its visibility and safety.(Ref.: DCA/P/4/1.27)
- Easy application
- Anti corrosion
- Excellent chemical resistance
- Excellent adhesion
- No fire hazard during storage and application
- Environmental friendly
- Excellent film build up & durability
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
ZINC GREY
ORANGE
WHITE
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.