A water-based epoxy cement screed with specially selected high crushing strength and chemical inert aggregates. It does not require primer and is compatible for over-coating.
Close
CEMFLOR MBS
An Epoxy Based Modified Cement Water Barrier/Underlayment
- Designed to use as a vapor barrier layer for epoxy and polyurethane coating.
- Ideally suited for wet and dry areas such as engineering plants, oil refineries, paint workshops, dairies, foods industries, breweries etc., that are continuously exposed to washing.
- Also suitable to be used as an underlayment for vinyl tiles laying.
- Water-based
- User-friendly
- Moisture tolerant
- Effective vapor barrier layer
- Excellent adhesion and high compressive strength
Color
Amber Grey
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURAFLOR NWB 21
An Epoxy Cementitous Underlayment
- Non-slip finish
- Solvent free; low odour
- High abrasion resistance
- Seamless and hygienic finish; when sealed, no crevices where dirt and bacteria can dwell
- Excellent chemical resistance to sugar and acids when topcoat with suitable epoxy / polyurethane toppings
- Easy to clean and sterilize, low maintenance requirement
Color
LIGHT GREY
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
AQUAREX SNG
A Non-Gassing Rust Inhibitive Water-Dispersed Epoxy
A high performance, non-gassing, rust inhibitive water dispersed epoxy designed to be used as a primer or top coat on steel substrates.
- Specially formulated as a high performance protective and decorative coating.
- Ideal to be used at site where solvent-based material is not desirable.
- Ideal for use as anti-corrosion for steel pipes, steel tanks and other facilities subjected to corrosion in a clean room environment.
- A rust inhibitor
- Compatible with a wide range of top coats
- Does not leach toxic ingredients after cured and does not contain any amine, ammonia or solvent
- Meets BS 6920-1988 (Part 1) requirement
- Non-gassing
- Resistant to a wide range of chemicals
- Water based product making application in confined places bearable
Color
Primer: Zinc Phosphate and with wide range of light color.
Topcoat: Wide range of colors for industrial usage.
STONE GREY
MISTY GREY
DEEP GREY
GREY WHITE
TELE GREY
Finish
Primer: Low Sheen
Topcoat: Semi-gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
D’PRIME 301 SB
A Silane Penetrating Acrylic Wall Sealer
A solvent-based silane-modified deep penetrating acrylic primer sealer.
- Used as a preparatory primer for solvent-based acrylic decorative / protective coating systems.
- Ideal includes application for most masonry and concrete substrates where anti-carbonation requirement is needed.
- Excellent adhesion
- Fast dry and water resistant
- Suitable for both interior and exterior application
Color
WHITE
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
D’TOP 300 S
A High Performance Silicone Acrylic Coating
A specially formulated high performance silicone acrylic coating based on Siloxane Nanotechnology.
- Ideal to be used as a protective and decorative coating for concrete and masonry substrates.
- Its anti-carbonation formulation makes it a recommended product for all types of structure including bridges, tunnels, flyovers, buildings and those in aggressive marine and coastal environments.
- Allows for masonry to breathe
- Enhance aesthetic appearance
- Fast dry, shorten recoating time
- Excellent gloss and color retention
- Smooth glossy surface
- Anti-carbonating
- Maximum resistance to micro-organism growth and ultra violet rays
Color
Available in a wide range of colors.
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
CEMPROOF CERAMIC
An Insulative And Waterproofing Coating For Timber, Fiber, Mansonry And Metal Works
An emulsion of high grade ceramic polymers containing ceramic particles that doubles as heat and cold dissipating elements.
- Formulated for used to insulate most building materials from solar heat.
- Does not require a primer in most cases due to its unique composition.
- Can be used on timber, fiber, masonry and metal.
- Can be applied directly to rust to prevent further rusting problem.
- Water based
- Attractive Appearance
- Non Toxic, Non Flammable
- Built-in rust inhibitor
- Excellent adhesion, no primer required in most cases
- Non-Yellowing & High UV resistance
- Quick drying & Highly Flexible
- High Solar Reflectivity & Temperature Reduction
- Corrosion and Abrasion Resistance
- Cost Saving and Efficient
Color
GREY WHITE
CREAM
WHITE
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
CEMBOND
A Cementitious Surfacer
A non-shrink surface conditioner consisting of portland cement and a specific cationic latex.
- Designed to be used as a surface conditioner or as a skim coat to smoothen out surfaces, and for the most part to cover up old mosaic or unglazed ceramic tile.
- Formulated to waterproof, fill and seals pores/voids as well as pointing of all tiles, and masonry surface.
- Direct application
- Non-toxic, suitable for potable water tank
- Excellent adhesion on porous and non-porous surfaces
- Flexible crack bridging coating
- Resistant to carbon dioxide and chloride ion diffusion
- Resistant to weather and mild chemicals
Color
Grey
Finish
Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
CRYSTAL SEAL
A Permanent Waterproofing For Concrete And Mortar By Crystallization
A capillary waterproofing formulation of a proprietary blend of moisture-active chemical, quartz, sand and cement.
- Ideal for waterproofing concrete and mortar against moisture.
- Proven material for water tanks, sewage, swimming pools, tunnels, retaining walls, lift pits, balconies, fish ponds, concrete slabs, water treatment structures, wet areas such as toilets & bathrooms, underground shafts, foundations, basements and etc.
- Environmental friendly; non-toxic
- Repair and rehabilitate hairline cracks
- One component & no special protective system is required
- Removes moisture and reduces the likelihood of corrosion of reinforcing steel in the concrete
- One component & no special protective system is required
- Resistance to frost, weathering, salt water, aggressive ground water and many chemicals
- Non-flammable, inorganic
Color
STONE GREY
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DERMASTIC 900
Liquid Waterproofing Membrane
A flexible liquid waterproofing and sealing membrane, based on modified acrylic polymers. Its latex properties completely resists ozonolysis and other oxidative degradation.
- Ideal for waterproofing surfaces at non-trafficable areas.
- Can be used to refurbish and protect asbestos-cement roof sheets from atmospheric corrosion due to weathering and/ or pollution.
- Economical
- One component material & no mixing required
- Economical
- Ability to resist ozonolysis & other oxidative degradation
- Full resistant to ultra violet light
- Outstanding elasticity
Color
Other colors can be matched upon on request.
TELE GREY
GREY WHITE
PASSION GREEN
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURATHANE 515
An Aliphatic Polyurethane Coating
An aliphatic polyurethane coating that cures to a gloss, tile-like finish.
- Formulated for protection of exterior of tanks, piping, structural steel and concrete surfaces where chemical resistance and weather capability are required.
- An excellent coating to be used in chemical processing, pulp and paper, petrochemical, offshore drilling and similar demanding industries.
- High chemical resistant
- High gloss and colour retention
- Excellent weatherability
- High abrasion resistance
- Excellent flexibility
Color
Available in wide range of colors.
Finish
High Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURAGARD 104
A High Solid Surface Tolerant Epoxy Coating
A high surface tolerant epoxy enveloping coating. Formulated with exceptional penetrating power that will adhere on surfaces where extensive preparation is not feasible.
- Resistant to splash, spillage and fumes of acid, alkali, solvent and salt water when top coated with polyurethane coating.
- Also suitable for food, pharmaceutical, electronics, glove factory and other light industrial plants.
- Proven material for structural steel, bridges, tank exteriors, piping, roofs, off-shore and other substrate subject to high humidity and moisture.
- Self priming and surface tolerant
- Excellent adhesion on most surfaces
- Versatile, easy to apply and low maintenance
- Can be further top coated with compatible coatings
- Resistant to abrasion, chemical and corrosion
Color
LIGHT GREY
OFF WHITE
Finish
Semi Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURAGARD VE 98
Modified High Build Epoxy Vinyl Ester Resin For High
Temperature, Solvent And Chemical Resistance Coating Or FRP Lining System
A high build epoxy vinyl ester resins formulated with specially selected curing agents to withstand high temperature exposure, solvent and chemical attacks. A slip resistant texture can also be formulated if desired.
- Ideally suited for use in tank coating or lining where a high degree of resistance to chemicals, oils and grease is required such as waste water treatment tank lining, chemical manufacturing plants area, chemical drainage gutter or pipe and transportation tank lining.
- Durable and low maintenance costs
- High chemical temperature resistance
- Excellent chemical resistant against a wide range of industrial chemicals
- Liquid applied
- Specially formulated for use in hot climate area
Color
Available in White and Coral Brown. Other colors can be matched upon request.
CORAL BROWN
WHITE
Finish
Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.