A solvent-free epoxy coating with static controlled properties. The coating is available in anti-static. conductive or dissipative form.
Close
EPOCOTE 104 SP AS
High Performance Anti Static Solvent-Free Epoxy Coating
- Ideal for all cementitious substrate that requires anti-static protection.
-  Its ultra-high build formulation allows for a thickness of up to 100μm or more to be achieved in single application.
- Suitable to be used in ammunition plants, military arsenals, flammable solvent handling areas, powder explosion risk areas and electronic device handling areas.
- Excellent resistance to chemical, abrasion and impact
- Thermal shock
- Excellent bonding strength
- Low odour and permeability to water and chloride ions
- Eliminates electrostatic discharge from personnel vehicles and equipment
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
PASSION GREEN
GREY WHITE
TELE GREY
DEEP GREY
BRIGHT GREEN
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOCOTE 104 SP HC
A High Chemical Resistant Solvent-Free Novalac Epoxy Coating
A solvent-free, high chemical resistant Novolac epoxy coating and lining system for concrete and steel.
- Ideal for all cementitious and steel substrates that requires a high chemical and abrasion resistant floor finish.
- Its ultra high build formulation allows for a thickness of up to 100μ to be achieved in a single spray application.
- Recommended to use as a protective and lining coating on both vertical and horizontal surfaces.
- Application area includes water treatment tanks, chemical production facilities, tank farm, pulp, oil/gas facilities, crude oil production and paper mills.
- Excellent resistance to chemical, abrasion, impact and thermal shock
- High bonding strength when used with suitable primers
- Low permeability to water and chloride ions
- High chemical resistance; passed 60% concentration Hydrochloric Acid (HCI) test
- Low odour and food grade
Color
Available in Standard Flooring Colors and in clear. Other colors can be matched upon request.
WINDOW GREY
MISTY GREY
BRIGHT GREEN
SIGNAL BLUE
Finish
Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOCOTE 106 HB
A General Purposed Epoxy Coating
A durable, easy to apply, high build polyamide cured epoxy resin coating. Â When cured, forms a semi-gloss, impervious finish which is easily cleaned and maintained.
- Formulated for floors and walls where high level of aesthetic value and chemical resistance are required.
- Can be applied on concrete, masonry, timber, etc.
- A hygienic, dust free surface
- Hard wearing for foot and light vehicular traffic
- Excellent adhesion strength
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
GREY WHITE
MISTY GREY
BUTTER CREAM
BRICK RED
DEEP BLUE
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOCOTE 106 HB DUAL TONE
A Special Designer Effect Epoxy Coating
A durable, easy to apply, high build cured epoxy resin coating. Formulated to be applied with a designer special effect. When cured, forms a semi-gloss, impervious finish which is easily cleaned and maintained.
- Formulated for floors and walls where high level of aesthetic value and chemical resistance are required.
- Can be applied on concrete, masonry, timber, etc.
- Hygienic – provides easy to clean dust free surface
- Hardwearing – good abrasion resistance for foot and light vehicular traffic
- Excellent Adhesion
Color
Available in Standard Flooring Colors.
IVORY
BUTTER CREAM
BRICK RED
TELE GREY
MID BLUE
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
FLORAX 3001 AS
An Anti Static Pigmented Floor Wax
An anti static, pigmented polymeric emulsion with excellent adhesion properties.
- Reduce and/ or eliminate buildup of static electricity on concrete substrates, including old concrete floors which have been cleaned but retain some embedded stains of dirt and oil.
- Has greater advantage over solvent-borne system in ease of cleaning up and the capability to meet health, safety and environmental standards.
- Ideal for any manufacturing plants that requires normal static electricity control.
- Easy to apply as it’s a one component product
- Fast dry and requires not thinning
- Water based – VOC compliant
- Abrasion resistance : Fair
- Scuff resistance : Good
Color – Top Coat
Available in Standard Flooring colors. Other colors can be matched upon request.
PASTEL GREEN
BRIGHT GREEN
WHITE GREY
TELE GREY
STONE GREY
COLOR – Primer
Black Only
Finish
Semi-Low Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
FLORAX 3001 PLUS
A Hybrid Water-Based Acrylic Coating
A water-based floor/ wall sealer & surface hardener. Manufactured based on state of the art hybrid acrylic technology, it has exceptional adhesion, abrasion and weather resistance properties. This product is also highly breathable.
- Specially formulated to adhere on a variety of substrates, including ceramic tiles, natural stone, terrazzo & polished concrete which are properly prepared.
- Due to its high chemical and abrasion resistance, it is highly recommended to use as an anti graffiti wall coating.
- Also recommended to use as an anti carbonation coating for building structures.
- Areas of application include car parks, warehouses, HUT rooms, laboratory, exhibition hall, hospitals, schools, sports complex and etc.
- Excellent adhesion
- Good scuff resistance
- One component product & fast dry
- Excellent abrasion resistance
- Water based – VOC compliant
- UV and weather resistant : minimum yellowing
Color
Available in standard flooring colors and in clear. Other color can be matched upon request.
BRICK RED
PASTEL GREEN
BRIGHT GREEN
CREAM
ANTIQUE PINK
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
GLASCRETE
An Exposed Glass Aggregate Finish
A ready-to-use, colored or uncolored (depending on desired effect) mix of cement, silica sand, admixtures, and decorative glass designed for application by the dry shake method over freshly poured concrete surfaces.
- Used as a hard-wearing and abrasion-resistant floor finish for landscapes and/or interior spaces while preserving the structural integrity of the concrete and the look of natural materials.
- An economical way to create attractive and highly decorative plazas, walkways, pool decks, and driveways.
- Available in an unlimited variety of colors and aggregates
- A highly decorative and anti-slip finish
- Applicable to both exterior and Interior application.
- Unlimited choice of combination with aggregates.
- Economical, easy to clean and maintain.
- Wear and abrasion resistance
- Oil and grease resistant
Color
Available in various colors.
Finish
As per the glass aggregate texture exposed by the dry shake method topped with glaze coat.
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
S-CRETE HF
A trowel applied, polyurethane topping with an end finishing thickness of 6-9 mm screed. Functionally formulated to withstand severe chemical, mechanical, and thermal damages in industrial applications and repairing systems with a Matt and anti-skid finish.
- Mechanically durable to be used on flooring for loading docks and warehouses. Its anti-skid finish makes it ideal to be used in oily/ slippery service condition where the factor of safety is concerned.
- Area of application includes kitchen, beverage processing and packaging plants. It is also suitable for areas where chemical resistance is required, such as in chemical processing plant, containment area and wash down rooms.
- Alternatively, it is also suitable for areas where thermal shock resistance is required, such as with flooring for freezers, refrigerators, and oven installed spaces.
- Anti-skid surface for improved safety factor
- Anti microbial
- Excellent chemical resistance
- Maximum wear, abrasion and impact resistance
- Fastest “turnaround time” product
- User-friendly, no solvent odor during installation
- Optimum sanitation and hygienic finish.
- Easily cleaned and maintained
- Meets Japanese Standard JISZ 2801:2000, 5.2
Color
Standard S-CRETE colors.
BROWN BEIGE
RED
DARK GREY
GREEN
CREAM
Finish
Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
S-CRETE MF
A flow applied, self smoothing polyurethane topping functionally formulated to withstand severe chemical, mechanical, and thermal damages.
- Designed for thin layer applications and repairs and can be used as a new topping over old or worn out polyurethane floors. It is mechanically durable to be used on flooring for loading docks and warehouses.
- Area of application includes kitchen, beverage processing and packaging plants. It is also suitable for areas where chemical resistance is required, such as in chemical processing plant, containment area and wash down rooms.
- Alternatively, it is also suitable for areas where thermal shock resistance is required, such as with flooring for freezers, refrigerators, and oven installed spaces.
- Anti microbial
- Excellent chemical resistance
- Maximum wear, abrasion and impact resistance
- Fastest “turnaround time” product
- User-friendly, no solvent odor during installation
- Optimum sanitation and hygienic finish.
- Easily cleaned and maintained
- Meets Japanese Standard JISZ 2801:2000, 5.2
Color
Available in Standard Flooring Colors. Other colors can be matched upon request.
LIGHT GREY
DARK GREY
GREEN
CREAM
BROWN BEIGE
RED
Finish
Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
S-CRETE MF AS
A Self-Smoothening Anti-Static Polyurethane Topping
A self-smoothing polyurethane topping with an end finishing thickness of 3mm screed that offers anti-static and antimicrobial properties, as well as heavy duty chemical resistance.
- Ideal for use in areas where a durable and cleanable floor surface is required without the attended risks of static build up.
- Suitable to be used in ammunition plants, military arsenals, flammable solvent handling areas, powder explosion risk areas and electronic device handling areas.
- Eliminates electrostatic discharge from personnel vehicles and equipments.
- Anti microbial and has high temperature resistance
- High -density systems with maximum wear, abrasion and impact resistance
- Fastest turnaround time
- User-friendly, no solvent odor during installation
- Optimum sanitation and hygienic finish.
- Easily cleaned and maintained
- Meet British Standard BS 2050
- Meets Japanese Standard JISZ 2801:2000, 5.2
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
RED
DARK GREY
GREEN
CREAM
BROWN BEIGE
Finish
Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
SD FORMULA
A Concrete Sealer, Densifier, Dustproofer & Chemical Hardener
An environmental friendly, reactive concrete sealer designed to react strongly with free lime particles in concrete substrates before solidifying into a hardened, homogeneous concrete mass.
- Hardened concrete improves resistance to abrasion, thus making it dust-proof and reduces water/oil penetration.
- Increases the lifetime while reducing the maintenance of concrete floors.
- Recommended for high traffic areas such as warehouses, distribution centers, manufacturing plants, textile mills, food processing plants, aircraft hangars, carparks or service garages, etc.
- Forms a permanent, insoluble bond within the capillaries
- Produces a hardened surface layer that is breathable, dense and abrasion resistant
- Hardened surface is dust-proof as well as stain resistant
- Non-yellowing, non-discoloring product and can resists tire marks
- Mirror like finish when polished
Color
Clear
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
TC COAT
A Water-Based Court System
A single component water-based system specially formulated to be used for tennis courts/ badminton courts
- Consists of a high performance primer, binder and finishing coat
- For interior and exterior uses which when combined with selected aggregates to form a hard but shock absorbing, abrasive resistant surface specially for court construction.
- High abrasion resistance
- Excellent weatherability
- Excellent adhesion to base surface
- Good alkaline and mild chemical resistance
- Excellent workability
Color
Available in Standard Courts Colors. Other colors can be matched upon request.
OXIDE RED
CAPRI BLUE
RESELLA GREEN
Finish
Semi Gloss to Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.