Providing protection against corrosion and chemical spillage specifically for areas that require toughness and weatherability.

Showing all 6 results

Show sidebar

AQUAREX SNG

A Non-Gassing Rust Inhibitive Water-Dispersed Epoxy

A high performance, non-gassing, rust inhibitive water dispersed epoxy designed to be used as a primer or top coat on steel substrates.

  • Specially formulated as a high performance protective and decorative coating.
  • Ideal to be used at site where solvent-based material is not desirable.
  • Ideal for use as anti-corrosion for steel pipes, steel tanks and other facilities subjected to corrosion in a clean room environment.
  • A rust inhibitor
  • Compatible with a wide range of top coats
  • Does not leach toxic ingredients after cured and does not contain any amine, ammonia or solvent
  • Meets BS 6920-1988 (Part 1) requirement
  • Non-gassing
  • Resistant to a wide range of chemicals
  • Water based product making application in confined places bearable

Color

Primer: Zinc Phosphate and with wide range of light color.
Topcoat: Wide range of colors for industrial usage.

STONE GREY

MISTY GREY

DEEP GREY

GREY WHITE

TELE GREY

Finish

Primer: Low Sheen
Topcoat: Semi-gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CTE 4

A Coal Tar Epoxy Coating

A high solid, economical and reliable coal tar epoxy polyamide. Excellent for protection of steel and concrete in immersion and offshore services.

  • As a lining for exterior and tank interior carrying sour crude oil, petroleum products & salt water ballast. Also ideal to be used as protection for piping, trenches, sumps and barges.
  • As a heavy-duty coating for steel and concrete surfaces in sewage treatment plants, paper mills, chemical plants etc.
  • Flexible
  • Economical
  • Excellent abrasion resistance
  • Excellent chemical and water resistance

Color

Black

Finish

Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAPOL 500

A Pigmented Polyester Urethane Coating

A high performance, pigmented polyester urethane coating with anti slip properties capable to resist chemicals, ultra violet and abrasion.

  • Designed to be used as a protective and decorative finishing top coat to resist against chemical, ultra violet and abrasion.
  • Recommended area of applications include on concrete walls, fascias, doors, timber panels, floors and even aircraft bodies.
  • Also suitable for exterior of tanks, piping, structural steel and concrete surfaces where chemical resistance and weather capability are required.
  • Attractive and versatile; ultimate form of protection and decoration
  • Compliance – BS 476 Part 5, 6 & 7 for Class ‘2’ fire rating
  • Hard wearing – Recommended for use in vandal / graffiti prone areas

Color

Available in wide range of colors upon request.

BUTTER CREAM

WINDOW GREY

BRIGHT GREEN

SIGNAL BLUE

MISTY GREY

Finish

Gloss, Satin, Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURATHANE 515

An Aliphatic Polyurethane Coating

An aliphatic polyurethane coating that cures to a gloss, tile-like finish.

  • Formulated for protection of exterior of tanks, piping, structural steel and concrete surfaces where chemical resistance and weather capability are required.
  • An excellent coating to be used in chemical processing, pulp and paper, petrochemical, offshore drilling and similar demanding industries.
  • High chemical resistant
  • High gloss and colour retention
  • Excellent weatherability
  • High abrasion resistance
  • Excellent flexibility

Color

Available in wide range of colors.

Finish

High Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

EPOZINC 258

A High Build Zinc Rich Epoxy Primer

A high build, zinc-rich primer based on epoxy with excellent abrasion resistance that provides a long term corrosion protection to steel substrates.

  • Specially formulated to be used for maintenance or re-coating of inorganic zinc silicate primed areas.
  • Can also be used as a general zinc primer for galvanized steels and structural steel works.
  • Area of application includes chemical processing plant, exteriors of containers, paper mills, offshore platforms, refineries, marine structures, hulls, jetty piles and ship bottoms.
  • Fast drying
  • Quick and easy handling
  • Forms a durable coat compatible with a wide range of topcoats

Color

Zinc Grey

Finish

Flat

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

RUSTGARD 107

An Inhibitive Epoxy Primer

A premium grade, rust inhibitive epoxy primer for steel surfaces.

  • Specially formulated for use as a primer and to be further top coated with other compatible epoxy coatings.
  • Proven material for the protection of steel, tank exteriors, bridges, conveyors, offshore platforms, marine structures and any aggressive industrial and marine environments.
  • Economical
  • Provides a long term corrosion protection to steel substrates
  • Quick drying & can be top coated after 3 hours of curing at 30ÂșC
  • Compatible with most epoxy and polyurethane coatings

Color

Red Oxide

White

Finish

Flat

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.