Providing a protective coating against various elements as means to save on heating, cooling and waterproofing costs.

Showing all 7 results

Show sidebar

CEMBOND

A Cementitious Surfacer

A non-shrink surface conditioner consisting of portland cement and a specific cationic latex.

  • Designed to be used as a surface conditioner or as a skim coat to smoothen out surfaces, and for the most part to cover up old mosaic or unglazed ceramic tile.
  • Formulated to waterproof, fill and seals pores/voids as well as pointing of all tiles, and masonry surface.
  • Direct application
  • Non-toxic, suitable for potable water tank
  • Excellent adhesion on porous and non-porous surfaces
  • Flexible crack bridging coating
  • Resistant to carbon dioxide and chloride ion diffusion
  • Resistant to weather and mild chemicals

Color

Grey

Finish

Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMPROOF CERAMIC

An Insulative And Waterproofing Coating For Timber, Fiber, Mansonry And Metal Works

An emulsion of high grade ceramic polymers containing ceramic particles that doubles as heat and cold dissipating elements.

  • Formulated for used to insulate most building materials from solar heat.
  • Does not require a primer in most cases due to its unique composition.
  • Can be used on timber, fiber, masonry and metal.
  • Can be applied directly to rust to prevent further rusting problem.
  • Water based
  • Attractive Appearance
  • Non Toxic, Non Flammable
  • Built-in rust inhibitor
  • Excellent adhesion, no primer required in most cases
  • Non-Yellowing & High UV resistance
  • Quick drying & Highly Flexible
  • High Solar Reflectivity & Temperature Reduction
  • Corrosion and Abrasion Resistance
  • Cost Saving and Efficient

Color

GREY WHITE

CREAM

WHITE

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CRYSTAL SEAL

A Permanent Waterproofing For Concrete And Mortar By Crystallization

A capillary waterproofing formulation of a proprietary blend of moisture-active chemical, quartz, sand and cement.

  • Ideal for waterproofing concrete and mortar against moisture.
  • Proven material for water tanks, sewage, swimming pools, tunnels, retaining walls, lift pits, balconies, fish ponds, concrete slabs, water treatment structures, wet areas such as toilets & bathrooms, underground shafts, foundations, basements and etc.
  • Environmental friendly; non-toxic
  • Repair and rehabilitate hairline cracks
  • One component & no special protective system is required
  • Removes moisture and reduces the likelihood of corrosion of reinforcing steel in the concrete
  • One component & no special protective system is required
  • Resistance to frost, weathering, salt water, aggressive ground water and many chemicals
  • Non-flammable, inorganic

Color

STONE GREY

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DERMASTIC 900

Liquid Waterproofing Membrane

A flexible liquid waterproofing and sealing membrane, based on modified acrylic polymers. Its latex properties completely resists ozonolysis and other oxidative degradation.

  • Ideal for waterproofing surfaces at non-trafficable areas.
  • Can be used to refurbish and protect asbestos-cement roof sheets from atmospheric corrosion due to weathering and/ or pollution.
  • Economical
  • One component material & no mixing required
  • Economical
  • Ability to resist ozonolysis & other oxidative degradation
  • Full resistant to ultra violet light
  • Outstanding elasticity

Color

Other colors can be matched upon on request.

TELE GREY

GREY WHITE

PASSION GREEN

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAGARD 104

A High Solid Surface Tolerant Epoxy Coating

A high surface tolerant epoxy enveloping coating. Formulated with exceptional penetrating power that will adhere on surfaces where extensive preparation is not feasible.

  • Resistant to splash, spillage and fumes of acid, alkali, solvent and salt water when top coated with polyurethane coating.
  • Also suitable for food, pharmaceutical, electronics, glove factory and other light industrial plants.
  • Proven material for structural steel, bridges, tank exteriors, piping, roofs, off-shore and other substrate subject to high humidity and moisture.
  • Self priming and surface tolerant
  • Excellent adhesion on most surfaces
  • Versatile, easy to apply and low maintenance
  • Can be further top coated with compatible coatings
  • Resistant to abrasion, chemical and corrosion

Color

LIGHT GREY

OFF WHITE

Finish

Semi Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAPOL 500

A Pigmented Polyester Urethane Coating

A high performance, pigmented polyester urethane coating with anti slip properties capable to resist chemicals, ultra violet and abrasion.

  • Designed to be used as a protective and decorative finishing top coat to resist against chemical, ultra violet and abrasion.
  • Recommended area of applications include on concrete walls, fascias, doors, timber panels, floors and even aircraft bodies.
  • Also suitable for exterior of tanks, piping, structural steel and concrete surfaces where chemical resistance and weather capability are required.
  • Attractive and versatile; ultimate form of protection and decoration
  • Compliance – BS 476 Part 5, 6 & 7 for Class ‘2’ fire rating
  • Hard wearing – Recommended for use in vandal / graffiti prone areas

Color

Available in wide range of colors upon request.

BUTTER CREAM

WINDOW GREY

BRIGHT GREEN

SIGNAL BLUE

MISTY GREY

Finish

Gloss, Satin, Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURATHANE 515

An Aliphatic Polyurethane Coating

An aliphatic polyurethane coating that cures to a gloss, tile-like finish.

  • Formulated for protection of exterior of tanks, piping, structural steel and concrete surfaces where chemical resistance and weather capability are required.
  • An excellent coating to be used in chemical processing, pulp and paper, petrochemical, offshore drilling and similar demanding industries.
  • High chemical resistant
  • High gloss and colour retention
  • Excellent weatherability
  • High abrasion resistance
  • Excellent flexibility

Color

Available in wide range of colors.

Finish

High Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.