A high performance, pigmented polyester urethane coating with anti slip properties capable to resist chemicals, ultra violet and abrasion.
Close
DURAPOL 500
A Pigmented Polyester Urethane Coating
- Designed to be used as a protective and decorative finishing top coat to resist against chemical, ultra violet and abrasion.
- Recommended area of applications include on concrete walls, fascias, doors, timber panels, floors and even aircraft bodies.
- Also suitable for exterior of tanks, piping, structural steel and concrete surfaces where chemical resistance and weather capability are required.
- Attractive and versatile; ultimate form of protection and decoration
- Compliance – BS 476 Part 5, 6 & 7 for Class ‘2’ fire rating
- Hard wearing – Recommended for use in vandal / graffiti prone areas
Color
Available in wide range of colors upon request.
BUTTER CREAM
WINDOW GREY
BRIGHT GREEN
SIGNAL BLUE
MISTY GREY
Finish
Gloss, Satin, Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURATHANE 506 SP
Flexible PU Sports Court System
A solvent-free polyurethane-based flexible sport courts system featuring an unique tenacity abrasion resistance of PU elasticity. Regarded as one of the most versatile material for court system anent the aspect of aesthetic, protective and athletic purposes.
- To use as a shock absorbent sport court system; be it indoor/outdoor & either on asphalt or concrete substrate.
- Such as indoor/outdoor athletic courses, tracks, fields, tennis court, basketball court, volleyball court, badminton court, handball court and children’s play grounds, etc.
- Shock absorbent – helps to reduce the risk of knee injuries
- Elastic and abrasion resistance
- Excellent weatherability and durability
- Low cost for maintenance
- Anti-slip
- Good adhesion on concrete, asphalt, wood, etc.
Color
Available in Standard Flooring colors.
YELLOW
BLUE
RED
GREEN
Finish
Semi Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance,
Close
TC COAT
A Water-Based Court System
A single component water-based system specially formulated to be used for tennis courts/ badminton courts
- Consists of a high performance primer, binder and finishing coat
- For interior and exterior uses which when combined with selected aggregates to form a hard but shock absorbing, abrasive resistant surface specially for court construction.
- High abrasion resistance
- Excellent weatherability
- Excellent adhesion to base surface
- Good alkaline and mild chemical resistance
- Excellent workability
Color
Available in Standard Courts Colors. Other colors can be matched upon request.
OXIDE RED
CAPRI BLUE
RESELLA GREEN
Finish
Semi Gloss to Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
SD FORMULA
A Concrete Sealer, Densifier, Dustproofer & Chemical Hardener
An environmental friendly, reactive concrete sealer designed to react strongly with free lime particles in concrete substrates before solidifying into a hardened, homogeneous concrete mass.
- Hardened concrete improves resistance to abrasion, thus making it dust-proof and reduces water/oil penetration.
- Increases the lifetime while reducing the maintenance of concrete floors.
- Recommended for high traffic areas such as warehouses, distribution centers, manufacturing plants, textile mills, food processing plants, aircraft hangars, carparks or service garages, etc.
- Forms a permanent, insoluble bond within the capillaries
- Produces a hardened surface layer that is breathable, dense and abrasion resistant
- Hardened surface is dust-proof as well as stain resistant
- Non-yellowing, non-discoloring product and can resists tire marks
- Mirror like finish when polished
Color
Clear
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOCOTE 106 HB DUAL TONE
A Special Designer Effect Epoxy Coating
A durable, easy to apply, high build cured epoxy resin coating. Formulated to be applied with a designer special effect. When cured, forms a semi-gloss, impervious finish which is easily cleaned and maintained.
- Formulated for floors and walls where high level of aesthetic value and chemical resistance are required.
- Can be applied on concrete, masonry, timber, etc.
- Hygienic – provides easy to clean dust free surface
- Hardwearing – good abrasion resistance for foot and light vehicular traffic
- Excellent Adhesion
Color
Available in Standard Flooring Colors.
IVORY
BUTTER CREAM
BRICK RED
TELE GREY
MID BLUE
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
S-CRETE HF
A trowel applied, polyurethane topping with an end finishing thickness of 6-9 mm screed. Functionally formulated to withstand severe chemical, mechanical, and thermal damages in industrial applications and repairing systems with a Matt and anti-skid finish.
- Mechanically durable to be used on flooring for loading docks and warehouses. Its anti-skid finish makes it ideal to be used in oily/ slippery service condition where the factor of safety is concerned.
- Area of application includes kitchen, beverage processing and packaging plants. It is also suitable for areas where chemical resistance is required, such as in chemical processing plant, containment area and wash down rooms.
- Alternatively, it is also suitable for areas where thermal shock resistance is required, such as with flooring for freezers, refrigerators, and oven installed spaces.
- Anti-skid surface for improved safety factor
- Anti microbial
- Excellent chemical resistance
- Maximum wear, abrasion and impact resistance
- Fastest “turnaround time” product
- User-friendly, no solvent odor during installation
- Optimum sanitation and hygienic finish.
- Easily cleaned and maintained
- Meets Japanese Standard JISZ 2801:2000, 5.2
Color
Standard S-CRETE colors.
BROWN BEIGE
RED
DARK GREY
GREEN
CREAM
Finish
Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
D’LINE 302
A Pigmented Acrylic Road Marking
A silicone, acrylic-based road marking filled with ceramic powder for extra wear resistance performance.
- Formulated especially for road markings or car parks demarcation, road dividers and other safety warning purposes.
- Excellent adhesion
- Fast dry; shorter traffic opening time
- Excellent wear resistance
- Enhanced light retroflectibility
- Good flexibility
Color
Standard D’LINE colors. Special colors can be matched upon request.
MID BLUE
BRIGHT GREEN
BUTTER CREAM
STONE GREY
DEEP GREY
Finish
Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DECKLINE 500 WB
An Aliphatic Polyurethane Coating
A water-based, UV stable polyurethane floor sealer with gloss finish.
- Designed as a finishing coat to resist UV and abrasion.
- Suitable for car parks, line marking, warehouse and other production facilities where cleanliness is required.
- Attractive: Good colour retention
- UV resistant
- Good abrasion resistance
- Low VOC & odour
- Easy to apply, clean and maintain
Color
Available in standard floor colors and clear.
BROOM YELLOW
WHITE
BLACK
Finish
Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
S-CRETE MF
A flow applied, self smoothing polyurethane topping functionally formulated to withstand severe chemical, mechanical, and thermal damages.
- Designed for thin layer applications and repairs and can be used as a new topping over old or worn out polyurethane floors. It is mechanically durable to be used on flooring for loading docks and warehouses.
- Area of application includes kitchen, beverage processing and packaging plants. It is also suitable for areas where chemical resistance is required, such as in chemical processing plant, containment area and wash down rooms.
- Alternatively, it is also suitable for areas where thermal shock resistance is required, such as with flooring for freezers, refrigerators, and oven installed spaces.
- Anti microbial
- Excellent chemical resistance
- Maximum wear, abrasion and impact resistance
- Fastest “turnaround time” product
- User-friendly, no solvent odor during installation
- Optimum sanitation and hygienic finish.
- Easily cleaned and maintained
- Meets Japanese Standard JISZ 2801:2000, 5.2
Color
Available in Standard Flooring Colors. Other colors can be matched upon request.
LIGHT GREY
DARK GREY
GREEN
CREAM
BROWN BEIGE
RED
Finish
Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURAFLOR SL 500
A Self-Smoothening Epoxy Resin Topping
A self-smoothening epoxy floor topping for very thin application of minimum 0.5mm thickness.
As a finishing topping over DURAFLOR SC UNDERLAY and DURAFLOR EM system.
Re-surfacing old and worn out epoxy self-leveling system.
For usage in light-duty manufacturing areas like food processing, clean rooms, laboratories and hospitals.
Hygienic – provides easy to clean dust free surface
Aesthetically Pleasing – enhances working environment
Food grade – non solvent and taint free formulation
Hard wearing – good abrasion resistance with stand foot light vehicular traffic.
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
IVORY
BUTTER CREAM
BRICK RED
WINDOW GREY
TELE GREY
Finish
Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURAFLOR SL 2K
A Self-Smoothening Epoxy Topping Laid in 1 – 2mm Thick
A seamless, self-smoothening epoxy topping laid between 1 – 2 mm in a single application.
- For use on areas like cleanrooms, pharmaceuticals, electronics, food packaging, dry process manufacturing and other hygienic processing environments.
- Hygienic – provides easy to clean dust free surface
- Range of colors – enhances working environment
- Food grade – non-solvent and taint free formulation
- Hard wearing – good abrasion resistance to withstand light vehicular and foot traffic
Color
Available in standard flooring colors. Other colors can be matched upon request.
Finish
Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
AQUAREX NG
A Water Dispersed Non-Gassing Epoxy Coating
A non-gassing, water dispersed epoxy to be used as a primer or top coat.
- Ideal to be used at site where solvent-based material is not desirable.
- Formulated for use at light industrial areas where controlled hygiene and cleanliness are of importance.
- Ideal for use as floor and wall coating in high level manufacturing and highly sensitive areas such as electronics, semi-conductors, precision, calibrating, assembly plant, pharmaceutical and clean room
- Reliable and economical
- Resistant to wide range of chemicals
- Meet BS 6920-1988 (Part 1) requirement
- Less sensitive to moisture during application
- Water based product makes application in confined places bearable
- Compatible with cementitious as well as asphaltic substrate
- Does not leach toxic ingredients after cured and does not contain any amine, ammonia or solvent
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
GREY WHITE
TELE GREY
BUTTER CREAM
CREAM
BRIGHT GREEN
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.