A seamless, self-smoothing epoxy flooring system laid between 2-3mm in a single application.
Close
DURAFLOR SL 2
A Self-Smoothening Epoxy Topping 2-3 MM Thickness
- Ideal for industrial application where surfaces are subjected to intensive wheeled and forklift traffic & where a chemical resistant and hard wearing floor finish is required.
- Suitable for AGV, Hovair and other robotic equipment trafficking.
- Seamless & hygienic finish
- Easy to clean & sterillise
- Fast installation & low maintenance
- High abrasion resistance
- Solvent free & low odour
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
MID BLUE
BRIGHT GREEN
BUTTER CREAM
STONE GREY
DEEP GREY
Finish
Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
D’TOP 300 S
A High Performance Silicone Acrylic Coating
A specially formulated high performance silicone acrylic coating based on Siloxane Nanotechnology.
- Ideal to be used as a protective and decorative coating for concrete and masonry substrates.
- Its anti-carbonation formulation makes it a recommended product for all types of structure including bridges, tunnels, flyovers, buildings and those in aggressive marine and coastal environments.
- Allows for masonry to breathe
- Enhance aesthetic appearance
- Fast dry, shorten recoating time
- Excellent gloss and color retention
- Smooth glossy surface
- Anti-carbonating
- Maximum resistance to micro-organism growth and ultra violet rays
Color
Available in a wide range of colors.
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURAFLOR SL WC
A Water Clear Solvent Free Epoxy Coating
A water-clear, low viscosity, solvent free epoxy seal coating.
- A versatile product which can be used as coating or lining and as a binder for mortar system if desired.
- Its low viscosity & ultra-high build property allows for a thickness of up to 100μm to be achieved in single application.
- Excellent resistance to chemical, abrasion, impact and thermal shock.
- Excellent bonding strength
- Low permeability
- Low odour
Color
Clear
Finish
Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
FLORAX 3001 PLUS
A Hybrid Water-Based Acrylic Coating
A water-based floor/ wall sealer & surface hardener. Manufactured based on state of the art hybrid acrylic technology, it has exceptional adhesion, abrasion and weather resistance properties. This product is also highly breathable.
- Specially formulated to adhere on a variety of substrates, including ceramic tiles, natural stone, terrazzo & polished concrete which are properly prepared.
- Due to its high chemical and abrasion resistance, it is highly recommended to use as an anti graffiti wall coating.
- Also recommended to use as an anti carbonation coating for building structures.
- Areas of application include car parks, warehouses, HUT rooms, laboratory, exhibition hall, hospitals, schools, sports complex and etc.
- Excellent adhesion
- Good scuff resistance
- One component product & fast dry
- Excellent abrasion resistance
- Water based – VOC compliant
- UV and weather resistant : minimum yellowing
Color
Available in standard flooring colors and in clear. Other color can be matched upon request.
BRICK RED
PASTEL GREEN
BRIGHT GREEN
CREAM
ANTIQUE PINK
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
CEMPROOF CERAMIC
An Insulative And Waterproofing Coating For Timber, Fiber, Mansonry And Metal Works
An emulsion of high grade ceramic polymers containing ceramic particles that doubles as heat and cold dissipating elements.
- Formulated for used to insulate most building materials from solar heat.
- Does not require a primer in most cases due to its unique composition.
- Can be used on timber, fiber, masonry and metal.
- Can be applied directly to rust to prevent further rusting problem.
- Water based
- Attractive Appearance
- Non Toxic, Non Flammable
- Built-in rust inhibitor
- Excellent adhesion, no primer required in most cases
- Non-Yellowing & High UV resistance
- Quick drying & Highly Flexible
- High Solar Reflectivity & Temperature Reduction
- Corrosion and Abrasion Resistance
- Cost Saving and Efficient
Color
GREY WHITE
CREAM
WHITE
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
CEMBOND
A Cementitious Surfacer
A non-shrink surface conditioner consisting of portland cement and a specific cationic latex.
- Designed to be used as a surface conditioner or as a skim coat to smoothen out surfaces, and for the most part to cover up old mosaic or unglazed ceramic tile.
- Formulated to waterproof, fill and seals pores/voids as well as pointing of all tiles, and masonry surface.
- Direct application
- Non-toxic, suitable for potable water tank
- Excellent adhesion on porous and non-porous surfaces
- Flexible crack bridging coating
- Resistant to carbon dioxide and chloride ion diffusion
- Resistant to weather and mild chemicals
Color
Grey
Finish
Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
AQUAREX 1001 AS
A Water Dispersed Anti Static Epoxy Coating
A water dispersed epoxy coating filled with conductive filler installed during priming.
- To provide a hard wearing, seamless, and totally conductive anti-static flooring and wall coating system.
- Easy to apply
- Excellent adhesive
- Solvent free – makes application in confined places bearable
- Less sensitive to moisture during application
- Meets BS 2050 Antistatic Requirements
- Meets BS 6920-1988 (Part 1) Requirements
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
BRIGHT GREEN
GREY WHITE
TELE GREY
STONE GREY
MISTY GREY
Finish
Semi Gloss to Matt
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
CRYSTAL SEAL
A Permanent Waterproofing For Concrete And Mortar By Crystallization
A capillary waterproofing formulation of a proprietary blend of moisture-active chemical, quartz, sand and cement.
- Ideal for waterproofing concrete and mortar against moisture.
- Proven material for water tanks, sewage, swimming pools, tunnels, retaining walls, lift pits, balconies, fish ponds, concrete slabs, water treatment structures, wet areas such as toilets & bathrooms, underground shafts, foundations, basements and etc.
- Environmental friendly; non-toxic
- Repair and rehabilitate hairline cracks
- One component & no special protective system is required
- Removes moisture and reduces the likelihood of corrosion of reinforcing steel in the concrete
- One component & no special protective system is required
- Resistance to frost, weathering, salt water, aggressive ground water and many chemicals
- Non-flammable, inorganic
Color
STONE GREY
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
FLORAX 3001 AS
An Anti Static Pigmented Floor Wax
An anti static, pigmented polymeric emulsion with excellent adhesion properties.
- Reduce and/ or eliminate buildup of static electricity on concrete substrates, including old concrete floors which have been cleaned but retain some embedded stains of dirt and oil.
- Has greater advantage over solvent-borne system in ease of cleaning up and the capability to meet health, safety and environmental standards.
- Ideal for any manufacturing plants that requires normal static electricity control.
- Easy to apply as it’s a one component product
- Fast dry and requires not thinning
- Water based – VOC compliant
- Abrasion resistance : Fair
- Scuff resistance : Good
Color – Top Coat
Available in Standard Flooring colors. Other colors can be matched upon request.
PASTEL GREEN
BRIGHT GREEN
WHITE GREY
TELE GREY
STONE GREY
COLOR – Primer
Black Only
Finish
Semi-Low Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DURAFLOR SL AS
A Conductive Self-Smoothening Epoxy Topping
A resin based conductive floor system comprising of a conductive undercoat topped with a 1mm self-smoothing epoxy conductive topping.
- Ideal for use in areas where a durable, cleanable, chemically resistant floor surface is required without the attended risks of static build up.
- Suitable to be used in ammunition plants, military arsenals, flammable solvent handling areas, powder explosion risk areas and electronic device handling areas.
- Enhances working environment
- Provides seamless, easily cleaned surface
- Eliminates electrostatic discharge – from personnel vehicles and equipment
- Protection against both chemical and mechanical attack
- Meets the requirements of international standards. U.K. BS 2050
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
PASSION GREEN
TELE GREY
STONE GREY
DEEP GREY
CALM GREEN
Finish
Gloss
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
EPOCOTE 104 SP AS
High Performance Anti Static Solvent-Free Epoxy Coating
A solvent-free epoxy coating with static controlled properties. The coating is available in anti-static. conductive or dissipative form.
- Ideal for all cementitious substrate that requires anti-static protection.
- Its ultra-high build formulation allows for a thickness of up to 100μm or more to be achieved in single application.
- Suitable to be used in ammunition plants, military arsenals, flammable solvent handling areas, powder explosion risk areas and electronic device handling areas.
- Excellent resistance to chemical, abrasion and impact
- Thermal shock
- Excellent bonding strength
- Low odour and permeability to water and chloride ions
- Eliminates electrostatic discharge from personnel vehicles and equipment
Color
Available in Standard Flooring colors. Other colors can be matched upon request.
PASSION GREEN
GREY WHITE
TELE GREY
DEEP GREY
BRIGHT GREEN
Finish
Satin
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.
Close
DERMASTIC 900
Liquid Waterproofing Membrane
A flexible liquid waterproofing and sealing membrane, based on modified acrylic polymers. Its latex properties completely resists ozonolysis and other oxidative degradation.
- Ideal for waterproofing surfaces at non-trafficable areas.
- Can be used to refurbish and protect asbestos-cement roof sheets from atmospheric corrosion due to weathering and/ or pollution.
- Economical
- One component material & no mixing required
- Economical
- Ability to resist ozonolysis & other oxidative degradation
- Full resistant to ultra violet light
- Outstanding elasticity
Color
Other colors can be matched upon on request.
TELE GREY
GREY WHITE
PASSION GREEN
Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.