Showing 25–28 of 28 results

Show sidebar

AQUAREX 1001 NWB (II)

A Water Dispersed Ceramic Epoxy Coating

A high build, water dispersed ceramic epoxy coating with antibacterial properties.

  • Ideal to be used at site where solvent-based material is not desirable.
  • For protection of surfaces against dusting, solvent, chemical attack.
  • Hard wearing and abrasion resistant with has good anti carbonation properties.
  • Recommended product for hospital, clinics, food processing plant for its board range of antibacterial properties.
  • Breathable.
  • Good Anti Carbonation.
  • Excellent adhesion and abrasion resistance.
  • Less sensitive to moisture during application.
  • Fast dry / open time even at low temperature.
  • Compatible with cementitious as well as asphaltic.
  • Solventless – makes application in confined places bearable.

Color

Available in Standard Flooring Colors. Other colors can be matched upon request.

TELE GREY

MISTY GREY

DEEP GREY

BRIGHT GREEN

BUTTER CREAM

Finish

Satin, Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURADECK

A solvent free, semi-flexible, trafficable polyurethane deck coating system that provides a non skid and minimal noise generation while elevating the appearance with multi colors.

  • Designed to be used for car parks, garage, auto service center and other high traffic facilities.
  • Non skid, non dusting & has excellent abrasion resistance
  • Minimum noise generation
  • Aesthetically attractive with multi colors
  • Excellent bonding strength & crack bridging ability
  • 100% UV light stable- non yellowing
  • Excellent resistance to cleaning detergent, engine oil, battery acid, hydraulic fluid, fuel, etc.

Color

Available in Standard Flooring Colors. Other colors can be matched upon request.

DEEP GREY

STONE GREY

MISTY GREY

CREAM

GREEN

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAPOL 500 ANTI-SLIP

A Pigmented Polyester Urethane Anti-Slip Coating

A high performance, pigmented polyester urethane coating with anti-slip properties capable to resist chemicals, ultra violet and abrasion.

  • A protective and decorative top coat
  • Designed as a finishing coat to resist chemicals, ultra violet and abrasion.
  • Suitable for concrete surfaces where chemical resistance and weather capability are required.
  • Anti-slip
  • Outstanding gloss and color retention.  (Attractive)
  • Versatility in design
  • Compliance for Class ‘2’ fire rating
  • Hard wearing for use in vandal/ graffiti prone areas

Color

Available in wide range of colors upon request.

BUTTER CREAM

WINDOW GREY

BRIGHT GREEN

SIGNAL BLUE

MISTY GREY

Finish

Gloss, Satin, Matt.

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

EPOCOTE 104 SP HC

A High Chemical Resistant Solvent-Free Novalac Epoxy Coating

A solvent-free, high chemical resistant Novolac epoxy coating and lining system for concrete and steel.

  • Ideal for all cementitious and steel substrates that requires a high chemical and abrasion resistant floor finish.
  • Its ultra high build formulation allows for a thickness of up to 100μ to be achieved in a single spray application.
  • Recommended to use as a protective and lining coating on both vertical and horizontal surfaces.
  • Application area includes water treatment tanks, chemical production facilities, tank farm, pulp, oil/gas facilities, crude oil production and paper mills.
  • Excellent resistance to chemical, abrasion, impact and thermal shock
  • High bonding strength when used with suitable primers
  • Low permeability to water and chloride ions
  • High chemical resistance; passed 60% concentration Hydrochloric Acid (HCI) test
  • Low odour and food grade

Color

Available in Standard Flooring Colors and in clear. Other colors can be matched upon request.

WINDOW GREY

MISTY GREY

BRIGHT GREEN

SIGNAL BLUE

Finish

Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.