Providing protection for steel and concrete exposed to immersion service.

Showing all 4 results

Show sidebar

EPOLINE 139

A Non-Toxic, Potable Water Tank Lining

A high solid, non-toxic epoxy tank and surface lining.

  • A non-toxic coating to concrete and steel surfaces which are both chemical and corrosion resistant.
  • Designed to be used as water, fuel, ballast and storage tank lining.
  • Also applicable to hopper cars, cement mixer, silos, oil tanker, reservoirs, tanks and food processing environments.
  • High build in 2 coats.
  • Anti-corrosion
  • Safe food grade product
  • BS 6920 compliance
  • Reliable and low maintenance
  • Self priming – used as primer / top coat
  • Highly resistant to chemical and abrasion

Color

Available in white and light blue. Other colors can be matched upon request.

WHITE

DEEP BLUE

LIGHT BLUE

Finish

Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAGARD VE 98

Modified High Build Epoxy Vinyl Ester Resin For High
Temperature, Solvent And Chemical Resistance Coating Or FRP Lining System

A high build epoxy vinyl ester resins formulated with specially selected curing agents to withstand high temperature exposure, solvent and chemical attacks. A slip resistant texture can also be formulated if desired.

  • Ideally suited for use in tank coating or lining where a high degree of resistance to chemicals, oils and grease is required such as waste water treatment tank lining, chemical manufacturing plants area, chemical drainage gutter or pipe and transportation tank lining.
  • Durable and low maintenance costs
  • High chemical temperature resistance
  • Excellent chemical resistant against a wide range of industrial chemicals
  • Liquid applied
  • Specially formulated for use in hot climate area

Color

Available in White and Coral Brown. Other colors can be matched upon request.

CORAL BROWN

WHITE

Finish

Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

EPOMASTIC 109

A Heavy-Duty Epoxy Coal Tar Coating

A high build, heavy duty epoxy coal tar coating. Excellent for protection of concrete and steel in immersion and offshore services.

  • Specially formulated for protection of offshore structures, marine installations and pilings.
  • As a lining for exterior and tank interior carrying sour crude oil, petroleum products & salt water ballast. Also ideal to be used as protection for piping, trenches, sumps & concrete-splash blocks.
  • As a heavy-duty coating for steel and concrete surfaces in sewage treatment plants, paper mills, chemical plants etc.
  • Excellent protection for underground surfaces
  • Simple 1:1 mixing ratio
  • Chemical Resistance
  • Very good abrasion resistance

Color

BLACK

Finish

Flat

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

EPOCOTE 104 SP HC

A High Chemical Resistant Solvent-Free Novalac Epoxy Coating

A solvent-free, high chemical resistant Novolac epoxy coating and lining system for concrete and steel.

  • Ideal for all cementitious and steel substrates that requires a high chemical and abrasion resistant floor finish.
  • Its ultra high build formulation allows for a thickness of up to 100μ to be achieved in a single spray application.
  • Recommended to use as a protective and lining coating on both vertical and horizontal surfaces.
  • Application area includes water treatment tanks, chemical production facilities, tank farm, pulp, oil/gas facilities, crude oil production and paper mills.
  • Excellent resistance to chemical, abrasion, impact and thermal shock
  • High bonding strength when used with suitable primers
  • Low permeability to water and chloride ions
  • High chemical resistance; passed 60% concentration Hydrochloric Acid (HCI) test
  • Low odour and food grade

Color

Available in Standard Flooring Colors and in clear. Other colors can be matched upon request.

WINDOW GREY

MISTY GREY

BRIGHT GREEN

SIGNAL BLUE

Finish

Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.