Showing 1–12 of 67 results

Show sidebar

CEMGUARD HB 500 ANTI-SLIP

A Reactive Nano Silicate Anti-Slip Coating

A hybrid coating which is synthesized of inorganic component as a main component and organic component as a sub component with molecular unit reaction. It is has been designed to provide an anti-slip profile while also being an eco-friendly product which contains very little hazardous organic solvent.

  • Exceptional adhesion to a variety of substrate including prepared old/new concrete floors which are free from oil, stain and other contaminants.
  • Area of application includes car parking lot, aircraft hangar, machinery room, utility room, maintenance room, factory, warehouse, chemical lab, general office and food processing plant.
  • Enhanced traction
  • VOC compliance
  • Anti-stain, Anti-graffiti
  • Fire resistant, cured coating is nonflammable (>500 °C)
  • Water tolerant, product is not sensitive to ground moisture.
  • Product is not sensitive to high humidity and low temperature during application.

Color

Available in standard colors and clear.

DARK GREY

CREAM

BROWN BEIGE

RED

GREEN

Finish

Semi-Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAPOL 500

A Pigmented Polyester Urethane Coating

A high performance, pigmented polyester urethane coating with anti slip properties capable to resist chemicals, ultra violet and abrasion.

  • Designed to be used as a protective and decorative finishing top coat to resist against chemical, ultra violet and abrasion.
  • Recommended area of applications include on concrete walls, fascias, doors, timber panels, floors and even aircraft bodies.
  • Also suitable for exterior of tanks, piping, structural steel and concrete surfaces where chemical resistance and weather capability are required.
  • Attractive and versatile; ultimate form of protection and decoration
  • Compliance – BS 476 Part 5, 6 & 7 for Class ‘2’ fire rating
  • Hard wearing – Recommended for use in vandal / graffiti prone areas

Color

Available in wide range of colors upon request.

BUTTER CREAM

WINDOW GREY

BRIGHT GREEN

SIGNAL BLUE

MISTY GREY

Finish

Gloss, Satin, Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

RUSTGARD 107

An Inhibitive Epoxy Primer

A premium grade, rust inhibitive epoxy primer for steel surfaces.

  • Specially formulated for use as a primer and to be further top coated with other compatible epoxy coatings.
  • Proven material for the protection of steel, tank exteriors, bridges, conveyors, offshore platforms, marine structures and any aggressive industrial and marine environments.
  • Economical
  • Provides a long term corrosion protection to steel substrates
  • Quick drying & can be top coated after 3 hours of curing at 30ºC
  • Compatible with most epoxy and polyurethane coatings

Color

Red Oxide

White

Finish

Flat

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

EPOFIX 713 EPIS (UW)

Underwater Epoxy Resin Injection

An underwater grade, low viscosity epoxy adhesive formulated to seal and repair fine cracks in concrete as to restore the concrete’s structural strength.

  • Specially formulated for underwater or marine structure applications.
  • The cured adhesive will seal the cracks entirely and completely restores the concrete to its original monolithic condition.
  • Also suitable to be used as a repairing material for rebounding of delamination in concrete toppings, grouting of bolts, anchor bars etc and consolidation of friable rocks and stones.
  • Fast cure
  • High strength
  • Low viscosity, ready to flow
  • Excellent adhesion even on damp surfaces
  • Low reactivity thus reduces exothermic heat generation

Color

Amber Brownish

Finish

Flat

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAFLOR SL (HC) 2K

A Self-Smoothening Epoxy Topping 1-2mm Thickness

A seamless, self-smoothening epoxy topping meant for 1 – 2 mm in a single application.

  • For use on areas like food processing, clean rooms, laboratories, hospital, light duty manufacturing areas and as a topping for DURAFLOR EM Mortar System.
  • Food grade – non solvent and taint free formulation
  • Hard wearing – good abrasion resistance with stand foot light vehicular traffic
  • Range of colors – enhances working environment
  • Hygienic – provides easy to clean dust free surface

Color

Available in Standard Flooring colors. Other colors can be matched upon request.

CREAM

BUTTER CREAM

STONE GREY

DEEP GREY

PASSION GREEN

Finish

Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAFLOR SL COLORQUARTZ

Decorative Self-Smoothening Epoxy Topping

A seamless, decorative self-smoothening epoxy topping meant for 1mm in a single application.

  • To provide an easy to clean, decorative and durable floor with outstanding wear and chemical resistance.
  • For use on areas like food processing, clean rooms, laboratories, hospital, light duty manufacturing areas and as a topping for DURAFLOR EM Mortar System.
  • Food grade – non solvent and taint free formulation
  • Hard wearing – good abrasion resistance with stands foot and light vehicular traffic
  • Hygienic – Provides easy to clean, dust free surface
  • Range of colors – enhances working environment

Color

Available in a range of standard color combinations. Other colors can be matched upon request.

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMGUARD HB 500 AS

A Conductive Reactive Nano Silicate Hybrid Coating

A hybrid coating which is synthesized of inorganic component as a main component along with a conductive undercoat to prevent electrostatic build-up in sensitive areas.

  • Provides exceptional adhesion to a variety of substrate including prepared old/new concrete floors which are free from oil, stains and other contaminants.
  • Area of application includes car parking lot, aircraft hangars, machinery room, utility room, maintenance room, factory, warehouse, chemical lab, general office and food processing plant.
  • Water tolerant – product is not sensitive to ground moisture
  • Product is not sensitive to high humidity and low temperature during application
  • Provides protection against both chemical and mechanical attack
  • VOC compliance
  • Chemical/oil resistant
  • Anti-Stain, Anti-Graffiti
  • Fire resistant – cured coating is non-flammable (>500 °C)
  • Extremely hard wearing, behave like glass when fully cured

Color

Available in Standard Flooring colors.

DARK GREY

CREAM

BROWN BEIGE

RED

GREEN

Finish

Semi Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAFLOR SL NG

A Self-Smoothing Non-Gassing Epoxy Topping

A seamless, self-smoothening non gassing epoxy flooring system laid between 2-3mm in a single application.

  • To provide an easy to clean, chemical resistant and hard wearing floor finish.
  • Typical areas for use are dry process manufacturing, packaging and warehousing subjected to intensive wheeled & forklift traffic.
  • Suitable for AGV, Hovair and other robotic equipment trafficking.
  • Seamless & hygienic finish
  • Easy to clean & sterilize, low maintenance requirement
  • Attractive, light reflectance appearance
  • High abrasion resistance
  • Solvent free; low odour
  • Fast installation
  • Non gassing, Do not leach toxic ingredients after cured; does not contain any amine or ammonia or solvent
  • It meets the requirements of the following international standards UK: BS 2050, GERMANY DIN: 51953, FRANCE : PTT/TR 02-08, U.S.A : Fed. Spec 101C(method 4046)

Color

Available in Standard Flooring colors and in clear. Other colors can be matched upon request.

TELE GREY

BRIGHT GREEN

SIGNAL BLUE

ANTIQUE PINK

BRICK RED

Finish

Satin, Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURATHANE 506 SP

Flexible PU Sports Court System

A solvent-free polyurethane-based flexible sport courts system featuring an unique tenacity abrasion resistance of PU elasticity. Regarded as one of the most versatile material for court system anent the aspect of aesthetic, protective and athletic purposes.

  • To use as a shock absorbent sport court system; be it indoor/outdoor & either on asphalt or concrete substrate.
  • Such as indoor/outdoor athletic courses, tracks, fields, tennis court, basketball court, volleyball court, badminton court, handball court and children’s play grounds, etc.
  • Shock absorbent – helps to reduce the risk of knee injuries
  • Elastic and abrasion resistance
  • Excellent weatherability and durability
  • Low cost for maintenance
  • Anti-slip
  • Good adhesion on concrete, asphalt, wood, etc.

Color

Available in Standard Flooring colors.

YELLOW

BLUE

RED

GREEN

Finish

Semi Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance,

TC COAT

A Water-Based Court System

A single component water-based system specially formulated to be used for tennis courts/ badminton courts

  • Consists of a high performance primer, binder and finishing coat
  • For interior and exterior uses which when combined with selected aggregates to form a hard but shock absorbing, abrasive resistant surface specially for court construction.
  • High abrasion resistance
  • Excellent weatherability
  • Excellent adhesion to base surface
  • Good alkaline and mild chemical resistance
  • Excellent workability

Color

Available in Standard Courts Colors. Other colors can be matched upon request.

OXIDE RED

CAPRI BLUE

RESELLA GREEN

Finish

Semi Gloss to Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

HYDRAFOAM PU

A Polyurethane Foam Injection

A hydrophobic polyurethane grout designed to stop water leakages.

  • Typically injected into cracks in concretes, honeycombed concretes, soils, pipes, pipe intrusions and other voids by use of a high pressure pump.
  • Stop water leaks coming through cracked or honey-combed concrete voids between wall floor, wall and ceiling, expansion joints, cold joints and pipe intrusions.
  • It is used to repair concrete walls, ceilings and floors that are leaking; in tunnels, including limestone, manholes, sewer lines and in concrete dams.
  • Seals water carrying cracks
  • It can be applied using suitable high or low pressure injection packers.
  • Low viscosity
  • The expansion rate of the material is 20 times of its own volume.

Color

Dark Amber

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

EPOFIX 713 EPIS

Injection Grade Epoxy Resin

A low viscosity epoxy adhesive formulated to seal and repair fine cracks in concrete as to restore the concrete’s structural strength.

  • Designed to be used as a repairing material for cracked concrete.
  • The cured adhesive will seal the cracks entirely and completely restores the concrete to its original monolithic condition.
  • Rebounding of delamination in concrete thus avoiding costly replacements
  • Consolidation of friable rocks and stones

    Color

    Brownish-Amber.

    Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.