Parturient ut id tellus vulputatre ac ultrlices a part ouriesnt sapien dignissim partu rient a a inter drum vehicula. Ornare metus laoreet tincidunt eros rolem tristique pretium malada.

Cras rhoncus vivamus luctus platea arcu laoreet selm. Curae est condenectus sed hac a parturient vestibulum.

Showing 1–12 of 67 results

Show sidebar

CEMFLOR MBS

An Epoxy Based Modified Cement Water Barrier/Underlayment

A water-based epoxy cement screed with specially selected high crushing strength and chemical inert aggregates. It does not require primer and is compatible for over-coating.

  • Designed to use as a vapor barrier layer for epoxy and polyurethane coating.
  • Ideally suited for wet and dry areas such as engineering plants, oil refineries, paint workshops, dairies, foods industries, breweries etc., that are continuously exposed to washing.
  • Also suitable to be used as an underlayment for vinyl tiles laying.
  • Water-based
  • User-friendly
  • Moisture tolerant
  • Effective vapor barrier layer
  • Excellent adhesion and high compressive strength

Color

Amber Grey

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

EPOCOTE 104 SP HC

A High Chemical Resistant Solvent-Free Novalac Epoxy Coating

A solvent-free, high chemical resistant Novolac epoxy coating and lining system for concrete and steel.

  • Ideal for all cementitious and steel substrates that requires a high chemical and abrasion resistant floor finish.
  • Its ultra high build formulation allows for a thickness of up to 100μ to be achieved in a single spray application.
  • Recommended to use as a protective and lining coating on both vertical and horizontal surfaces.
  • Application area includes water treatment tanks, chemical production facilities, tank farm, pulp, oil/gas facilities, crude oil production and paper mills.
  • Excellent resistance to chemical, abrasion, impact and thermal shock
  • High bonding strength when used with suitable primers
  • Low permeability to water and chloride ions
  • High chemical resistance; passed 60% concentration Hydrochloric Acid (HCI) test
  • Low odour and food grade

Color

Available in Standard Flooring Colors and in clear. Other colors can be matched upon request.

WINDOW GREY

MISTY GREY

BRIGHT GREEN

SIGNAL BLUE

Finish

Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURAPOL 500 ANTI-SLIP

A Pigmented Polyester Urethane Anti-Slip Coating

A high performance, pigmented polyester urethane coating with anti-slip properties capable to resist chemicals, ultra violet and abrasion.

  • A protective and decorative top coat
  • Designed as a finishing coat to resist chemicals, ultra violet and abrasion.
  • Suitable for concrete surfaces where chemical resistance and weather capability are required.
  • Anti-slip
  • Outstanding gloss and color retention.  (Attractive)
  • Versatility in design
  • Compliance for Class ‘2’ fire rating
  • Hard wearing for use in vandal/ graffiti prone areas

Color

Available in wide range of colors upon request.

BUTTER CREAM

WINDOW GREY

BRIGHT GREEN

SIGNAL BLUE

MISTY GREY

Finish

Gloss, Satin, Matt.

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

DURADECK

A solvent free, semi-flexible, trafficable polyurethane deck coating system that provides a non skid and minimal noise generation while elevating the appearance with multi colors.

  • Designed to be used for car parks, garage, auto service center and other high traffic facilities.
  • Non skid, non dusting & has excellent abrasion resistance
  • Minimum noise generation
  • Aesthetically attractive with multi colors
  • Excellent bonding strength & crack bridging ability
  • 100% UV light stable- non yellowing
  • Excellent resistance to cleaning detergent, engine oil, battery acid, hydraulic fluid, fuel, etc.

Color

Available in Standard Flooring Colors. Other colors can be matched upon request.

DEEP GREY

STONE GREY

MISTY GREY

CREAM

GREEN

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CEMGUARD HB 500

A hybrid coating which is synthesized of inorganic component as a main component and organic component as a subcomponent with molecular unit reaction. It is an eco-friendly product which contains very little hazardous organic solvent.

  • Exceptional adhesion to a variety of substrate including prepared old/new concrete floors which are free from oil, stain and other contaminants.
  • Area of application includes car parking lot, aircraft hangar, machinery room, utility room, maintenance room, factory, warehouse, chemical lab, general office and food processing plant.
  • Chemical/oil resistant
  • Anti stain, Anti-Graffiti
  • Fire resistant – cured coating is nonflammable (>500 °C)
  • Extremely hard wearing
  • Water tolerant – product is not sensitive to ground moisture
  • Excellent adhesion
  • Not sensitive to high humidity and low temperature

Color

Available in standard colors and clear.

CREAM

RED

GREEN

DARK GREY

BROWN BEIGE

Finish

Semi Gloss

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

AQUAREX 1001

A Water Dispersed Epoxy Coating

A water dispersed epoxy coating formulated to provide a durable coating system for walls and floors that are subjected to light traffic.

  • Ideal to be used at site where solvent-based material is not desirable.
  • For protection of surfaces against dusting, solvent and certain chemical attack.
  • Formulated for use at light to medium traffic areas where hygiene and cleanliness are of importance.
  • Proven material for clean rooms, food processing plants, assembly plants, pharmaceuticals, warehouse, garages, etc.
  • Hygienic – dust free surfaces.
  • Solvent-free – makes application in confined places bearable.
  • Food grade – non-solvent and non-toxic. Meets BS 6920-1988 (Part 1) requirement.
  • Hard wearing – good abrasion resistance for foot and light vehicular traffic.

Color

Available in Standard Flooring colors and in clear. Other colors can be matched upon request.

MID BLUE

PASSION GREEN

BUTTER CREAM

ANTIQUE PINK

TELE GREY

Finish

Satin

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

AQUAREX 1001 NWB (II)

A Water Dispersed Ceramic Epoxy Coating

A high build, water dispersed ceramic epoxy coating with antibacterial properties.

  • Ideal to be used at site where solvent-based material is not desirable.
  • For protection of surfaces against dusting, solvent, chemical attack.
  • Hard wearing and abrasion resistant with has good anti carbonation properties.
  • Recommended product for hospital, clinics, food processing plant for its board range of antibacterial properties.
  • Breathable.
  • Good Anti Carbonation.
  • Excellent adhesion and abrasion resistance.
  • Less sensitive to moisture during application.
  • Fast dry / open time even at low temperature.
  • Compatible with cementitious as well as asphaltic.
  • Solventless – makes application in confined places bearable.

Color

Available in Standard Flooring Colors. Other colors can be matched upon request.

TELE GREY

MISTY GREY

DEEP GREY

BRIGHT GREEN

BUTTER CREAM

Finish

Satin, Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

AQUAREX EPH

A water dispersed, hybrid epoxy coating formulated using the latest hybrid technology to deliver superior adhesion, abrasion and water tolerant properties.

  • Formulated for use on walls and floors of hangars, warehouses, garages, manufacturing facilities, clean rooms, car parks, walkway and other light to medium traffic areas.
  • Economical
  • Hygienic – easy to clean and maintain
  • Durable – excellent abrasion resistance
  • Attractive
  • Odorless
  • Environmental Friendly

Color

Available in pigmented and clear for glazing.

LIGHT GREY

DARK GREY

GREEN

BROWN BEIGE

CREAM

Finish

Satin

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

EPOCOTE 104 SP

A Solvent Free Epoxy Resin Coating

A solvent free and easy to apply epoxy resin coating. When cured, it forms a gloss, seamless and impervious finish which is easily cleaned.

  • Can be applied on all cementitious floor substrates subjected to semi heavy mechanical loads.
  • Recommended to use as a protective and lining coating on both vertical and horizontal surfaces.
  • Hygienic – easy to clean
  • Good abrasion resistance for semi heavy mechanical loads
  • Excellent adhesion

Color

Available in Standard Flooring Colors. Other colors can be matched upon request.

CREAM

SIGNAL BLUE

BRIGHT GREEN

TELE GREY

STONE GREY

Finish

Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

EPOCOTE 106 HB

A General Purposed Epoxy Coating

A durable, easy to apply, high build polyamide cured epoxy resin coating.  When cured, forms a semi-gloss, impervious finish which is easily cleaned and maintained.

  • Formulated for floors and walls where high level of aesthetic value and chemical resistance are required.
  • Can be applied on concrete, masonry, timber, etc.
  • A hygienic, dust free surface
  • Hard wearing for foot and light vehicular traffic
  • Excellent adhesion strength

Color

Available in Standard Flooring colors. Other colors can be matched upon request.

GREY WHITE

MISTY GREY

BUTTER CREAM

BRICK RED

DEEP BLUE

Finish

Satin

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

GLASCRETE

An Exposed Glass Aggregate Finish

A ready-to-use, colored or uncolored (depending on desired effect) mix of cement, silica sand, admixtures, and decorative glass designed for application by the dry shake method over freshly poured concrete surfaces.

  • Used as a hard-wearing and abrasion-resistant floor finish for landscapes and/or interior spaces while preserving the structural integrity of the concrete and the look of natural materials.
  • An economical way to create attractive and highly decorative plazas, walkways, pool decks, and driveways.
  • Available in an unlimited variety of colors and aggregates
  • A highly decorative and anti-slip finish
  • Applicable to both exterior and Interior application.
  • Unlimited choice of combination with aggregates.
  • Economical, easy to clean and maintain.
  • Wear and abrasion resistance
  • Oil and grease resistant

Color

Available in various colors.

Finish

As per the glass aggregate texture exposed by the dry shake method topped with glaze coat.

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.

CTE 4

A Coal Tar Epoxy Coating

A high solid, economical and reliable coal tar epoxy polyamide. Excellent for protection of steel and concrete in immersion and offshore services.

  • As a lining for exterior and tank interior carrying sour crude oil, petroleum products & salt water ballast. Also ideal to be used as protection for piping, trenches, sumps and barges.
  • As a heavy-duty coating for steel and concrete surfaces in sewage treatment plants, paper mills, chemical plants etc.
  • Flexible
  • Economical
  • Excellent abrasion resistance
  • Excellent chemical and water resistance

Color

Black

Finish

Matt

Disclaimer: Coverage figure given is theoretical and the practical coverage may be reduced due to site condition etc. CEMKRETE makes no representation or guarantee of any kind regarding the appearance or suitability of our product. Feel free to contact us for specification assistance.